Canon XF305 Camcorder Firmware 1.0.8.0 Download

Posted at December 22, 2024 by PCI-DB Team

Canon XF305 Camcorder Firmware 1.0.8.0 Description

The following options have been added to the Camcorder's Custom Picture Settings (CP):

- Wide DR: enables a dynamic range of 600%.
- Highlight Priority (Hlt.Pri.): enables the capturing of footage in a natural gradation by reducing overexposure in bright areas without compressing highlights.
- S/N Priority (S/N Pri.): enables the recording of footage with a suppressed noise level.

Precautions for updating the firmware:

- If the firmware update is not performed correctly, the camera may stop working.
- Please be sure to carefully read the important points below, and perform operations in accordance with the following operating procedure.
- All camera settings will be reset when you perform the firmware update.
- It is not possible to revert the firmware back to a previous version after you have performed the firmware update.
- Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source during the firmware update. Doing so may cause the camera to malfunction.

Initialize the SD card with the camera:

- Insert the SD card into the camera’s SD card slot, and close the SD card compartment cover.
- Slide the power switch to CAMERA.
- Press the MENU, and open the [Initialization] submenu.
- Select [SD Card] [Complete] and then press the SET.
- Select [OK] and then press the SET.
- The SD card is initialized and all the data it contains is erased.
- When the confirmation message appears, press the SET.
- Press the MENU, slide the power switch to OFF, and then remove the SD card.
- Download and extract the downloadable archive.
- Copy the .FIM firmware update data to the SD card.

Update the camera to the new firmware:

- After inserting the charged battery pack into the camera, connect the camera to the power outlet using the compact power adapter.
- Insert the SD card prepared in Step 3 into the camera’s SD card slot, and close the SD card compartment cover.
- Slide the POWER switch to CAMERA.
- Press the MENU, and in the submenu of [Other Functions], select [Firmware], and then press the SET.
- The firmware update confirmation screen will be displayed.
- When you select [OK] and then press the SET, the firmware update will start.
- The firmware update takes approximately 5 minutes to complete. During the update, please do not turn off the camera or operate any of its controls. Doing so may cause the camera to malfunction.
- After the update ends, the camera will restart automatically, and a firmware update completion screen will be displayed.
- When you press the SET, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.
- Check that the firmware version has changed.
- Slide the POWER switch to OFF, and then remove the SD card.
- Make sure to initialize the SD card used for the firmware update before using it again. In addition, please delete the downloaded firmware your computer.
- If the firmware update does not finish normally, or if the camera no longer starts normally, please contact our

About Camcorders Updates:

Upgrading your camcorder to a different firmware version should improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camcorder’s firmware can recover its functionality in the unlikely event that the currently installed version is faulty or the device’s performance dropped after an upgrade. However, you should bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camcorder’s firmware be carefully performed by a power user, but the process can also be initiated by a regular user at his or her own risk. Whichever the case, this step should be taken only when absolutely necessary.

When it comes to updating the device, make sure that you have saved all your personal data and configurations before initiating the process, and that the battery is fully charged. You’re not to use the unit’s buttons while the installation is in progress either.

As for the update method, most of the times, you’re supposed to copy the firmware file onto a suitable memory card, insert it into the camcorder, and start the upgrade from the device’s update section menu.

Still, each device has specific steps for a successful upgrade and various ways to enter update mode, which means that, before you set off to work, you must carefully read and understand the product’s installation guide.

With this in mind, if you consider installing this firmware, click on the download button, get the desired version, and apply it to the device; if not, check with our website as often as possible so that you don’t miss the update that will boost your camcorder’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CANON Drivers