GitUp GIT2 Action Camera Firmware 1.5 Beta Download

Posted at November 5, 2024 by PCI-DB Team

GitUp GIT2 Action Camera Firmware 1.5 Beta Description

Change log:

1. Added: 4:3 aspect ratio for 2880x2160P 24fps mode
2. Added: Wi-Fi mode option: AP, Station
3. Added: Support customize boot logo
4. Added: Wi-Fi Auto-start option: On, Off
5. Added: Pause icon on screen while recording is paused
6. Added: Colourful color option in video and photo mode (lower saturation compared to Vivid option)
7. Added: New OSD mode, only show video mode and recording dot
8. Added: Video shutter speed 1/48s
9. Added: Contrast option for video and photo: Normal, High, Low
10. Fixed: 2160P 24fps video not smooth
11. Fixed: Camera powered off while the file reached 4GB in quick capture mode
12. Fixed: Camera restarting issue in quick capture mode, plug the charger while recording, then stop recording and unplug the charger after the camera powered off
13. Fixed: Wrong EXIF info
14. Fixed: Video ZOOM issue while AV out in narrow mode
15. Improved: Stop recording in middle level for remote shutter.
16. Improved: Once press shutter button to start/stop recording while in screensave mode
17. Improved: Web camera resolution is upgraded to 1920*1440
18. Improved: Wi-Fi stream resolution is upgraded to 1280x960 if enable the Wi-Fi from 1440P or 1080P 4:3 mode.
19. Improved: Spanish, Czech, Russian, Polish language

Installation steps:

1. Use max. 32GB card formatted by camera or on computer as FAT32
2. Insert card in camera and connect it to computer using USB cable
3. Copy just the GIT2LD.bin on the root of the card
4. After GIT2LD.bin is copied to the card disconnect the camera from computer
5. Reconnect the camera to your computer and wait few seconds until you can chose Mass Storage from camera menu
6. Delete GIT2LD.bin from the card using your PC and
7. Copy the GIT2FW.bin file on the root of the card
8. Reconnect the camera to your computer and wait more seconds until you can chose Mass Storage from camera menu, the front green LED and back red LED will be blinking while upgrading.

How to connect Git2 with the wireless router?
1. Set the Wi-Fi mode on AP mode
2. Put the client.txt file in the SD card root directory, change the SSID and password
3. If set the Wi-Fi auto start option as off, you need long press the Wi-Fi button to enable the Wi-Fi and then connect the router automatically.
4. If set the Wi-Fi auto start option as on, it will connect with router automatically after powered on.

Note: For the Wi-Fi AP mode, if you set the Wi-Fi auto start option as on, it require to restart the camera to enable Wi-Fi automatically.

About Action Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers