Promote Canon/Nikon Remote Control Firmware 3.0 Download

Posted at November 5, 2024 by PCI-DB Team

Promote Canon/Nikon Remote Control Firmware 3.0 Description

Video:

- Remotely start, stop and change exposure (aperture, speed and ISO) both before and while recording. Supported cameras: Canon DSLRs capable of Live View and video recording
- Perform a rack focus

HDR:

- Automatic switch to bulb mode - now with more cameras (Canon 5D Mark II, 7D, 1Dx and more)
- Reverse order for HDR bracketing - take bracketed frames from highlights to shadows (longer to shorter exposures respectively), or vise-versa
- Optional HDR bracket shifts (e.g. shoot an HDR sequence not around your mid exposure, but shifted up or down)

Time-Lapse:

- Repeated Time-Lapse - automatically repeat a Time-Lapse sequence e.g. every 24 hours, ad infinitum
- Time-Lapse intervals as short as 1/10 of a second
- Elect to set exposure on camera or with Promote Control

Bulb Ramping:

- ND filters can now be specified up to 10EV and with 0.1EV precision
- Enhanced precision of interval timer
- Curve shifting - begin the ramping portion sooner or later than originally programmed
- Pause ramping - pictures will continue to be taken, but exposures will remain the same while ramping is paused
- Intervals can be measured from end of previous exposure to the start of next one. This prevents interval overruns, but may have an effect of your video speeding up or slowing down due to changing the effective interval (when ramping into longer or shorter exposures respectively). Due to this side effect, this interval measuring mode can also be used intentionally for interval ramping

Focus Stacking:

- Focus Stacking with Nikon cameras. Note that because Nikon cameras disable their rear LCD while tethered, the only way to control Focus Stacking is via lens distance scale. See enclosed User Manual for more details.

Sigma Support:

- Preliminary support for Sigma SD1/SD1 Merrill cameras. All modes except for Focus Stacking are available

Other:

- "Save/restore camera settings" Setup Setting. If enabled, exposure will be restored to settings from before sequence began
- Mode switching shortcuts - assign keyboard shortcuts for your favorite Promote Control modes
- Battery status indicator
- Nikon/Canon silent / quiet shutter modes are now supported

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers