Microsemi Adaptec RAID 72405 Controller Driver 7.5.0.41013 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Microsemi Adaptec RAID 72405 Controller Driver 7.5.0.41013
Category	Motherboard
Manufacturer	Adaptec
File Size	2.3 MB
Supported OS	Windows 2008 ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows Server 2012 ,Windows 10 ,Windows 10 64 bit

Microsemi Adaptec RAID 72405 Controller Driver 7.5.0.41013 Description

The package provides the Adaptec SAS Enclosure installation files for Adaptec RAID controllers.

These drivers are Microsoft Certified for:

- Adaptec RAID 72405 using Firmware/BIOS b32084

Important Notes

- During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- Print out these instructions for use as a reference during the installation process.

About SATA / AHCI / RAID Driver:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Adaptec Drivers