Hikvision DS-7732NI-I4 NVR Firmware 3.3.6 build 150828 Download

Posted at December 3, 2024 by PCI-DB Team

Hikvision DS-7732NI-I4 NVR Firmware 3.3.6 build 150828 Description

Reason of Upgrade :

- To fix some small bugs existing on previous firmware versions, so as to improve the performance of
- Hikvision -I series NVRs and enhance the experience of network surveillance system.

Firmware Updates

i. Add a configuration option “Enable H.265 (For Initial Access)”, which is used for switching stream to H.265 automatically when NVR accesses IPC at first time.
ii. Change the incoming/outgoing bandwidth of DS-7600NI-I2 and DS-7700NI-I4. The incoming bandwidth of 32-ch is changed from 320Mbps to 256Mbps, and the outgoing bandwidth is changed to 256Mbps for all types.
iii. Fix the issue of virtual host enabling failure after disabling it for the first time.
iv. Fix the issue of single channel/all channels live view switch failure for channel-zero in iVMS-4200.
v. Fix the issue of menu display abnormality when resolution is greater than 1080p with HDMI as aux output for DS-7600NI-I2 and DS-7700NI-I4.
vi. Fix the issue of no audio in live view with G.722 audio format in iVMS-4500.
vii. Fix the issue of PTZ cameras with motorized lens operation failure.

About Network Video Recorder Updates:

Applying a new firmware package on your Network Video Recorder (NVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Hikvision Drivers