Gigabyte GA-78LMT-S2P (rev. 4.0) Realtek LAN Driver 7.049.0927.2011 for Windows 7 Download

Posted at December 22, 2024 by PCI-DB Team

Gigabyte GA-78LMT-S2P (rev. 4.0) Realtek LAN Driver 7.049.0927.2011 for Windows 7 Description

Specifications:

CPU:
- AM3+ Socket
- Support for AMD AM3+ processor
- Support for AMD AM3 Phenom II processor / AMD Athlon II processor

Hyper Transport Bus:

- 4400 MT/s

Chipset:

- North Bridge: AMD 760G
- South Bridge: AMD SB710

Memory:

- 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
- Dual channel memory architecture
- Support for DDR3 1333+ (O.C.)/1066/800 MHz memory modules

Onboard Graphics:

- 1 x D-Sub port
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200

Audio:

- Realtek ALC889 codec
- High Definition Audio
- 2/4/5.1/7.1-channel

LAN:

- 1 x Realtek 8111E chip (10/100/1000 Mbit)

Expansion Slots:

- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 1 x PCI slot

Storage Interface:

- 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD

USB:

- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 6 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x clearing CMOS jumper

Back Panel Connectors:

- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x D-Sub port
- 1 x DVI-D port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller:

- ITE IT8720 chip

H/W Monitoring:

- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU fan speed control

Form Factor:

- Micro ATX Form Factor: 24.4cm x 20.6cm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers