Hikvision DS-9632NI-I8 NVR Firmware 3.3.6 build 150828 Download

Posted at December 25, 2024 by PCI-DB Team

Hikvision DS-9632NI-I8 NVR Firmware 3.3.6 build 150828 Description

Reason of Upgrade :

- To fix some small bugs existing on previous firmware versions, so as to improve the performance of
- Hikvision -I series NVRs and enhance the experience of network surveillance system.

Firmware Updates

i. Add a configuration option “Enable H.265 (For Initial Access)”, which is used for switching stream to H.265 automatically when NVR accesses IPC at first time.
ii. Change the incoming/outgoing bandwidth of DS-7600NI-I2 and DS-7700NI-I4. The incoming bandwidth of 32-ch is changed from 320Mbps to 256Mbps, and the outgoing bandwidth is changed to 256Mbps for all types.
iii. Fix the issue of virtual host enabling failure after disabling it for the first time.
iv. Fix the issue of single channel/all channels live view switch failure for channel-zero in iVMS-4200.
v. Fix the issue of menu display abnormality when resolution is greater than 1080p with HDMI as aux output for DS-7600NI-I2 and DS-7700NI-I4.
vi. Fix the issue of no audio in live view with G.722 audio format in iVMS-4500.
vii. Fix the issue of PTZ cameras with motorized lens operation failure.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Hikvision Drivers