Silicon Image SIL-3132 RAID Controller Driver 1.5.14.1 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Silicon Image SIL-3132 RAID Controller Driver 1.5.14.1
Category	Other Drivers Tools
Manufacturer	Silicon Image
File Size	183 KB
Supported OS	Windows Vista

Silicon Image SIL-3132 RAID Controller Driver 1.5.14.1 Description

SATALink PCI Express to 2-Port Serial ATA II Host Controller
SiI3132 is a single-chip, one-lane PCI Express to 2-port Serial ATA (SATA) II host controller that brings server-class features to the desktop. SiI3132 also supports all Serial ATA II features, including 3.0 Gbps SATA II transfer speeds, Native Command Queuing, port multipliers with FIS-based switching, programmable output signal swing strengths for longer external cables or extended backplanes, hot plugging, enclosure management and ATAPI device support.

Applications: Embedded Applications, ExpressCard Applications, PC Motherboards, Server Motherboards
Other Features & Benefits

* Host Protocol
* Optimized for transaction-oriented designs; minimal host overhead
* Supports two command-issuance mechanisms:
o Efficient in both embedded and PC implementations
o Reduces dependency on bridge behavior
* Supports up to 4Mb external Flash for BIOS expansion
* Supports connection to a SATA II-compliant Storage Enclosure Processor (SEP) via on-chip I2C interface
* Supports external Flash or serial EEPROM for programmable subsystem vendor ID/subsystem product ID
* JTAG boundary scan

About SATA / AHCI / RAID Controller Drivers:

When enabled by appropriate software, the SATA controller (RAID or AHCI) is properly recognized by the system and all of its features are made accessible.

In addition to that, the computer will have the ability to read all adapter characteristics, such as model and manufacturer, and will also be able to manage physical disk drives through the controller’s interface.

If you wish to apply this package, all you have to do is to make sure that the current release is compatible with both your adapter model and your operating system, and then to get the downloadable software. Extract it if necessary, run the available setup, and follow the on-screen instructions for a complete installation.

When finished, remember to perform a system reboot to make sure that all changes take effect properly. Please remember that, even though other OSes might also be compatible, we do not recommend installing this software on platforms other than the specified ones.

That being said, click the download button, get the package and apply it on your computer. Moreover, constantly check with our website to stay up to date with latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Silicon Image Drivers