Adaptec ASC-1405 HBA BIOS 4.0.1.2 Download

Posted at April 28, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Adaptec ASC-1405 HBA BIOS 4.0.1.2
Category	Bios
Manufacturer	Adaptec
File Size	109 KB
Supported OS	Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit

Adaptec ASC-1405 HBA BIOS 4.0.1.2 Description

Fixes:
- Resolved multiple issues with AFU Verify and Display functions.
- AFU Verify function changes
- The message displayed during the reading of the flash content was changed to a single line.
- When the content of the flash is different then the file, it will now display the
checksum for the image in flash and the file for comparison.
  - The full flash build number is now displayed properly when a Verify is completed.
- Increased response time of the Verify function.
- AFU Display function changes:
- The full flash build number is now displayed properly.
- Increased response time of the Display function.
- Resolved an issue with being unable to boot SLES 10 SP2 OS from attached SAS drives when a SATA CD was attached to the same controller and set as the primary boot device with media inserted.  
- Resolved an issue preventing Windows installation from seeing devices installed in an Enhance Technology RS8SS enclosure. During a Windows installation, after the driver was loaded (by pressing F6) Windows would respond with: "Setup either detected multiple disks in your machine that are indistinguishable or detected Raw disks. Setup has corrected the problem but a reboot is required. Setup cannot continue". Rebooting system would bring back to the same error. This error has been corrected and no reboot is required.
- Resolved an issue where the BIOS would stop responding and displayed "Adaptec HBA Reset failure.Please reboot" error when no LUNs were assigned.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Adaptec Drivers