Sound Devices USBPre 2 Audio Tool Firmware 1.03 Download

Posted at December 3, 2024 by PCI-DB Team

Sound Devices USBPre 2 Audio Tool Firmware 1.03 Description

Fixes:

- Fixed - DC offset issue with A/D values.

Firmware Installation Instructions:

- Sound Devices recommends backing up any existing audio data that may reside on the recorder. While no data on the storage is changed during the update process, it is best practice to backup the unit. In addition, it is highly recommended to save the current device settings since a firmware update can result in settings changing to factory default.
- Download the file from the link below that corresponds to your operating system.
- Connect the USBPre 2 to the computer with a USB cable and make certain it is recognized by the computer as a standard sound card.
- If the Sound Devices ASIO driver for the USBPre 2 is installed, it must be removed in order to successfully update the USBPre 2 firmware. The ASIO driver can be reinstalled after successfully updating the firmware. Double-click the file to run it.
- A window will appear with a message indicating the version number of the USBPre 2's currently installed firmware.
- Click the update button to update the USBPre 2 firmware. When directed, disconnect and reconnect the USB cable of the USBPre 2.

About DJ Mixers:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Sound Devices Drivers