Yamaha MTX Editor Utility 1.1.1/MTX3 Firmware 1.11 for Windows 7/Windows 8 Download

Posted at December 31, 2024 by PCI-DB Team

Yamaha MTX Editor Utility 1.1.1/MTX3 Firmware 1.11 for Windows 7/Windows 8 Description

MTX Editor 1.1.1:

New Features:
- Now supports the following devices: MTX5-D / XMV4280-D / XMV4140-D / XMV8280 / XMV8140 / XMV8280-D / XMV8140-D / EXi8 / EXo8 / DCP4S-US/EU / DCP4V4S-US/EU
- Setup of Dante devices (MTX5-D & XMV-D) can now be configured from MTX Editor.
- A maximum of four MTX systems can be set up and controlled in one project file.
- Preset Links can be created for preset recall across MTX systems within the same project file.
- Added the "XMV" screen and "EXo8" screen, which provides display and setup for the parameters of XMV and EXo8.
- Added the following functions on the Project screen: “Set up for the XMV DIMMER function” & “Display of the XMV [OUTPUT SETUP]”
- You can switch the meter point of the input channel between EQ OUT and POST ON (default).
- When a Preset is recalled, you can set the Scheduler function to be disabled in the "Preset" dialog box.
- Added display of the serial number for devices, and battery power status (for a device that contains batteries) in the "Device Information" dialog box.
- By using the switches of the DCP1V4S-US/EU, it is possible to change the control assignment of the knob, letting you use the knob for two or more functions such as Source Select.
- Added the function of word clock setup.
- Added an emergency mode: A preset can be assigned as an emergency mode, to be triggered by GPI. This can be utilized for muting a sound system in the case of emergency, such as the outbreak of a fire, etc.
- Added VXC series and VXS series to the library for the SPEAKER PROCESSOR.

Improvements:

- Improved the functions of SD Song Select & Play.
- The initial saved Project file destination was changed to My Documents. Previously this was set to either C:\Program Files or C:\Program Files (x86).

Fixed Bugs:

- Solved a problem when settings are taken into MTX Editor using the "Go Online From Devices" dialog box from the MTX system (of two or more MTX units) in the state where GPI Out is set up in the "Scheduler" dialog, the GPI Out settings of the second and subsequent MTX3 units will be incorrectly displayed.
- Solved a problem while playing back music and sound files which have been saved to an SD memory card, and SD PLAY recalled a preset having a "No Assign" setting or an event was called up having a SONG setting of "No Assign," the SD card playback was stopped rather than continuing unaffected.
MTX3 Firmware 1.11:

Fixed Bugs:

- Solved a problem in which the events set up in the Scheduler dialog box of MTX Editor could not be started until 60 seconds have elapsed after synchronization is completed.
- Solved a problem in which, when no playable sound files have been saved to an SD memory card, alert number 56 occurs.
- Solved a problem in which the Wireless DCP display is not updated automatically, when the Wireless DCP library has been changed in MTX Editor.
- Solved a problem in which an MTX3 is displayed as an unknown device in the [Alert] tab of MTX Editor, and the Log file stored in the MTX.

Known issues:

- A log file may not be successfully retrieved using the "Get Log" dialog box of MTX Editor. In this case, turn the device off and then on again and attempt to retrieve the log file again.
- The device may not be restarted automatically after running the Firmware Update. If the device is not restarted when “Complete” is displayed in the Status column, please turn the device off and then on again.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Yamaha Drivers