Adaptec 7085H Sierra SPC Driver 1.0.0.234 Download

Posted at December 3, 2024 by PCI-DB Team

Adaptec 7085H Sierra SPC Driver 1.0.0.234 Description

Benefits

- Highest performing I/O solution supporting SAS and SATA HDDs, SSDs, removable media, SAS tape drives.

Key Features

- Sixteen (71605H, 70165H) and eight (7085H, 7805H) 6Gb/s ports
- PMC PM8018 SAS protocol controller supports SAS and SATA HDDs, SSDs and SAS tape drives
- PCIe Gen 3 x8 host interface
- Low-profile MD2 form factor
- Support for SAS expanders
- Enclosure management support via LED header and SES2/SGPIO
- Up to 800,000 IOPS at 4 KB block size, UP to 1 million IOPS at 512 Byte block size
- Up to 6600 MB/s sequential throughput (64KB blocks)
- Data Transfer Rate of 6 Gb/s per port
- 8-lane PCIe Gen3 Bus System Interface
- Form Factor MD2- Low Profile

Connector Configuration

- 71605H: 4 internal mini SAS HD (SFF-8643)
- 70165H: 4 external mini SAS HD (SFF-8644)
- 7805H: 2 internal mini SAS HD (SFF-8643)
- 7085H: 2 external mini SAS HD (SFF-8644)

Bus System Interface

- 6805H: 4-Lane PCIe Gen2
- 6405H: 4-Lane PCIe Gen2

Management Utilities

- Adaptec BIOS Configuration Utility (ACU)
- Legacy configuration utility
- Flashable BIOS support
- Adaptec uEFI BIOS Configuration Utility
- HII based configuration utility
- Flashable BIOS support

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Adaptec Drivers