ViewSonic ViewPad 10e 3G Tablet Firmware 4.0 WW Download

Posted at December 26, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ViewSonic ViewPad 10e 3G Tablet Firmware 4.0 WW
Category	Joystick Gamepad Wheels And Tablets
Manufacturer	ViewSonic
File Size	189.9 MB
Supported OS	Android

ViewSonic ViewPad 10e 3G Tablet Firmware 4.0 WW Description

Package description:
- Upgrades your ViewSonic ViewPad 10e 3G version to ICS (Ice Cream Sandwich)

WARNING

: DO NOT install the upgrade if the Version is incorrect. This will cause a malfunction and void the warranty. If you are unsure then do not install the update and contact technical support.

Important Note:

- All the data in the Viewpad internal memory will be erased during the upgrade
and the current software will be replaced by a new version.
- The viewscene 3d will not be included in this new update.
- Make sure you back up all your personal data into an external memory device
before starting the upgrade.

Before you start updating your Viewpad 10e to the ICS version:

- Install the Viewpad 10e drivers in your computer by putting your device into Bootload.
- Make sure your device has at least 60% battery
- It’s advisable to plug the charger (optional)
- The device needs to be powered off before starting the update
- Copy the zip folder to any place in your desktop and unzip it.

How to Upgrade:

-Step 1: Press & Hold Volume -, insert a "clip" into the reset button hole for approximately 3 seconds.
- Step 2: Press and Hold Volume - and slide power button for approximately 3 seconds.
 - If done correctly the device should enter into bootload successfully and the charging led should turn off.
- Step 3: Open the MPTool folder and run the MPTool upgrade software (you might need to Right-Click/Second-Click it and select "Run as administrator" for the software to detect the device)
-  Step 3.1: Connect the ViewPad 10e by micro USB cable to the Desktop/Laptop and click the scan button. The "1" button should now change to green and a ready message should appear. If not, please repeat steps 1 and 2 or view the troubleshooting slide.
- Step 3.2: Click on the erase button. Erase success message should appear.
- Step 3.3: Click download button (the download process should start automatically). The menu bar should start to change between the following different infos: UBoot > Boot Kernel > Recover Kernel > System > Data > Download Success. After that a message with "Download End!" should appear.
- Step 4: Once the download complete message appears, disconnect the device from the Desktop/Laptop. To reboot the device, insert a "pin" in the reset hole and then slide the power button.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ViewSonic Drivers