Posted at November 2, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | D-Link DCS-930 Camera Firmware 1.03B4 |
---|---|
Category | Firmware |
Manufacturer | D-Link |
File Size | 3.5 MB |
Supported OS | OS Independent |
- The Firmware Restoration can only support IE6/7/8.
- When you execute the Firmware Restoration, you must connect the test PC and the camera to a network by isolating the heavy network traffic.
- The Firmware Restoration function is just implemented by a simple program, so we can't guarantee Firmware Restoration will be success every time you execute it.
- You can follow these steps to execute the Firmware Restoration:
I. Connect the camera and the computer to the same network via wired connection
II. If the camera is on, turn it off.
III. Hold down the reset button and then restart the camera, and holding down the reset button for 10 seconds.
IV. Configure the computer’s IP address to 192.168.0.x/255.255.255.0.
V. Launch your web browser.
VI. Enter 192.168.0.20 in the address line of your web browser, and press GO.
VII. A dialogue box will appear. Select your desired firmware file. Click Open.
VIII. Click Update, to update the firmware file to your camera.
IX. Restart the camera to complete the rescue operation.
Your camera and computer may not provide an accurate indication of activity. An error screen may appear. This is normal. Please do not click any buttons once the firmware file download process has started. Doing so could disrupt the process, and cause your camera to malfunction. Please be patient. The firmware download process will take 2 to 3 minutes. The process is complete when the LED blinks green.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Firmware File Size: 38.3 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 23.8 MB OS Independent
Install DriverDevice Type: Firmware File Size: 5.7 MB Windows All
Install DriverDevice Type: Router Switch Access Point File Size: 25.4 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 25.4 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 23.8 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 23.8 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 38.3 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 25.4 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.