PCI-DB.com
  1. Driver
  2. Motherboard
  3. ASUS MAXIMUS VII HERO Intel Smart Connect Driver 5.0.10.2850

ASUS MAXIMUS VII HERO Intel Smart Connect Driver 5.0.10.2850 Download

Posted at April 19, 2024 by PCI-DB Team

Install Driver Automatically
Device NameASUS MAXIMUS VII HERO Intel Smart Connect Driver 5.0.10.2850
CategoryMotherboard
ManufacturerIntel
File Size44.5 MB
Supported OSWindows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit

ASUS MAXIMUS VII HERO Intel Smart Connect Driver 5.0.10.2850 Description

Specifications:

CPU:
- Intel Socket 1150 for the 5th/New 4th/4th Generation Core i7/Core i5/Core i3/Pentium/Celeron Processors
- Supports Intel 22 nm CPU
- Supports Intel Turbo Boost Technology 2.0

Chipset:

- Intel Z97

Memory:

- 4 x DIMM, Max. 32GB, DDR3 3200(O.C.) / 3100(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)

Graphics:

- Integrated Graphics Processor- Intel HD Graphics support
- Multi-VGA output support : HDMI/DVI-D/RGB ports
- Supports HDMI with max. resolution 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz
- Supports DVI-D with max. resolution 1920 x 2000 @ 60 Hz
- Supports RGB with max. resolution 1920 x 2000 @ 60 Hz
- Maximum shared memory of 512 MB
- Supports Intel InTru 3D, Quick Sync Video, Clear Video HD Technology, Insider
- Supports up to 3 displays simultaneously

Multi-GPU Support:

- Supports NVIDIA Quad-GPU SLI Technology
- Supports AMD Quad-GPU CrossFireX Technology

Expansion Slots:

- 2 x PCIe 3.0/2.0 x16 (x16 or dual x8, red)
- 1 x PCIe 2.0 x16 (x4 mode, black)
- 3 x PCIe 2.0 x1

Storage:

- Intel Z97 chipset
- 6 x SATA 6Gb/s port(s), red
- Support Raid 0, 1, 5, 10
- Supports Intel Smart Response Technology, Intel Rapid Start Technology, Intel Smart Connect Technology
- 1 x M.2 Socket 3, blackwith M Key, type 2260/2280 storage devices support (PCIE mode)
- ASMedia PCIe SATA controller
- 2 x SATA 6Gb/s port(s), red

LAN:

- Intel I218V, 1 x Gigabit LAN Controller(s), featuring GAMEFIRST III
- Intel LAN- Dual interconnect between the Integrated LAN controller and Physical Layer (PHY)
- Anti-surge LANGuard

Audio:

- ROG SupremeFX 8-Channel High Definition Audio CODEC
- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking
- SupremeFX Shielding Technology
- ELNA premium audio capacitors
- Blu-ray audio layer Content Protection
- DTS Connect
- Optical S/PDIF out port(s) at back panel
- Sonic SoundStage
- Sonic SenseAmp
- Sonic Studio
- Sonic Radar II

USB Ports:

- 6 x USB 3.0/2.0 port(s) (4 at back panel, blue, 2 at mid-board)
- 7 x USB 2.0/1.1 port(s) (2 at back panel, black, 5 at mid-board)

Back I/O Ports:

- 1 x PS/2 keyboard/mouse combo port(s)
- 1 x DVI
- 1 x D-Sub
- 1 x HDMI
- 1 x LAN (RJ45) port(s)
- 4 x USB 3.0 (blue)
- 2 x USB 2.0
- 1 x Optical S/PDIF out
- 6 x Audio jack(s)
- 1 x USB BIOS Flashback Button(s)

Internal I/O Ports:

- 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
- 3 x USB 2.0 connector(s) support(s) additional 5 USB 2.0 port(s)
- 1 x M.2 Socket 3 for M Key, type 2260/2280 devices
- 1 x TPM header
- 8 x SATA 6Gb/s connector(s)
- 1 x CPU Fan connector(s) (1 x 4 -pin)
- 1 x CPU OPT Fan connector(s) (1 x 4 -pin)
- 4 x Chassis Fan connector(s) (4 x 4 -pin)
- 1 x 24-pin EATX Power connector(s)
- 1 x 8-pin ATX 12V Power connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s) (Q-Connector)
- 1 x MemOK! button(s)
- 1 x Thermal sensor connector(s)
- 1 x Power-on button(s)
- 1 x Reset button(s)
- 1 x Clear CMOS button(s)
- 1 x ROG extension (ROG_EXT) header(s)
- 1 x KeyBot Button
- 1 x Sonic SoundStage Button

Form Factor:

- ATX Form Factor
- 12 inch x 9.6 inch ( 30.5 cm x 24.4 cm )

About SCT (Smart Connect Technology):

Technology is evolving and improving with every new day so, to keep up and to make the most of your devices, it’s best if you use the latest software available. Intel’s Smart Connect Technology, for instance, could prove useful when time isn’t on your side.

If this utility is installed, compatible systems will be able to wake from different sleep states and enable network connectivity, which, in turn, allows applications to receive updates. Once the task is complete, the computer automatically goes back into sleep mode.

As a precaution, Intel Smart Connect Technology can prevent this action from taking place if the system has a low battery level (if present), or its temperature is high. Moreover, time interval between two wake-up-actions can be manually configured.

To apply this release, first make sure your configuration supports the technology, then get the package, run the available setup, and follow the displayed instructions for a complete installation.

Bear in mind that even though other platforms might be compatible as well, we do not recommend installing any software on OSes other than the specified ones.

Therefore, if you wish to install this software, click the download button, run the setup, and you will see for yourself how much time it can save you. Also, constantly check with our website to be the first one to find out when a new version is available.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.