PCI-DB.com
  1. Driver
  2. Bios
  3. EVGA X99 Classified BIOS 1.14

EVGA X99 Classified BIOS 1.14 Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically
Device NameEVGA X99 Classified BIOS 1.14
CategoryBios
ManufacturerEVGA
File Size5 KB
Supported OSOS Independent ,Windows All

EVGA X99 Classified BIOS 1.14 Description

Fixes:

- Support Xeon CPU.
- Support UEFI RAID. The UEFI RAID configuration page will exist under Advanced page when user set to RAID mode and disable CSM function.
- Support disable CPU cores by per core.
- Add USB profile function. User can save profile to USB and load from USB.
- Add load last saved settings function. (Hot key F9) User can load last settings even if clean CMOS.
- Add VT-d item under CPU configuration page.

Xeon CPU support list:

- Xeon E5-1680 V3 3.20 GHz
- Xeon E5-1660 V3 3.00 GHz
- Xeon E5-2695 V3 2.30 GHz
- Xeon E5-2697 V3 2.60 GHz
- Xeon E5-2670 V3 2.30 GHz
- Xeon E5-2660 V3 2.60 GHz
- Xeon E5-2687W V3 3.10 GHz
- Xeon E5-2687W V3 3.10 GHz
- Xeon E5-2685W V3 2.60 GHz
- Xeon E5-1650 V3 3.50 GHz
- Xeon E5-2667 V3 3.20 GHz
- Xeon E5-2630L V3 1.80 GHz
- Xeon E5-2609 V3 1.90 GHz
- Xeon E5-2609 V3 1.90 GHz
- Xeon E5-1620 V3 3.50 GHz
- Xeon E5-2643 V3 3.40 GHz
- Xeon E5-1630 V3 3.70 GHz
- Xeon E5-2603 V3 1.60 GHz
- Xeon E5-2620 V3 2.40 GHz
- Xeon E5-2640 V3 2.60 GHz
- Xeon E5-2623 V3 3.00 GHz
- Xeon E5-2637 V3 3.50 GHz

Windows Installation:

- Download the correct .zip file
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

BIOS Installation:

- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.




  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EVGA Drivers

EVGA X79 Dark EVBot Firmware P23

Device Type: Firmware File Size: 581 KB OS Independent

Install Driver

EVGA SR-X EVBot Firmware P15

Device Type: Firmware File Size: 1.6 MB OS Independent

Install Driver

EVGA Classified SR-2 EVBot Firmware P04

Device Type: Firmware File Size: 1.7 MB OS Independent

Install Driver

EVGA X79 EVBot Firmware P07

Device Type: Firmware File Size: 1.6 MB OS Independent

Install Driver

EVGA GTX 980 K|NGP|N EVBot Firmware P53

Device Type: Graphics Board File Size: 1.9 MB OS Independent

Install Driver

EVGA Classified EVBot Firmware P28

Device Type: Graphics Board File Size: 542 KB OS Independent

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.