Sony PXW-FS5 Camera Firmware 2.00 Download

Posted at December 26, 2024 by PCI-DB Team

Sony PXW-FS5 Camera Firmware 2.00 Description

Changes:

- The ND filter density can now be adjusted automatically.
- Shooting and recording in RAW mode is now supported. (“CBKZ-FS5RIF” (sold separately) is required)
- The zebra function has been enhanced, allowing you to select two types of setting. Also, the level settings can now be adjusted in 1% increments.
- You can now select the audio that is output in the headphones.
- You can now acquire and record position information when shooting using the GPS function.

Updating the system software:

- Download the update file
- Close all currently running programs on your computer.
- Double-click downloaded file to start up Firmware Updater
- Camera power on by AC adapter.
- Connect the camera to the computer with the supplied USB cable.
- When click the "Next" button on the Firmware Updater.
- After confirming the current version on the screen, click [Next]
- The information is displayed as shown below, the reset of the camera is done.
- After the reset work, will start the update. During the update (about 5-10 minutes), you will see the progress bar.
- When the update is completed, the “Finish the update” screen appears. Click [Finish] and disconnect the USB cable.
- Select [Menu] > [SYSTEM] > [VERSION DISPLAY] on the camera.
- The system software version is displayed.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Sony Drivers