Linksys RTP300 Router Firmware 3.1.24 Download

Posted at December 3, 2024 by PCI-DB Team

Linksys RTP300 Router Firmware 3.1.24 Description

Firmware upgrade instructions:

- Before you start, be sure you are using a PC that is connected to the RTP300-NA via a wired (Ethernet) connection.
- Open your web browser (e.g., Internet Explorer, Netscape, etc.)
- In the Address bar, type in the IP address of your router. The default IP address is 192.168.15.1.
- The default Username & Password is "admin", all lower case.
- Click on the Administration tab.
- Click on Firmware Upgrade.
- You'll be prompt for username and password again. The default Username is "Admin", leave the password blank. If that does not work please contact your service provider for device password.
- Browse for the firmware file that you have just extracted. The filename should end in .img
- Click the Upgrade button.
- The router will begin its upgrade routine. Do not power off or unplug the router until the process is completed. This process may take up to 5 minutes to complete.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Linksys Drivers