Advantech AIMB-564 JMicron RAID Driver 1.17.17.00 for XP/Vista Download

Posted at December 19, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Advantech AIMB-564 JMicron RAID Driver 1.17.17.00 for XP/Vista
Category	Motherboard
Manufacturer	JMicron
File Size	11.6 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit

Advantech AIMB-564 JMicron RAID Driver 1.17.17.00 for XP/Vista Description

This driver package provides the necessary installation files of Advantech AIMB-564 JMicron RAID Driver 1.17.17.00 for XP/Vista.

If you already installed a previous version of this driver, we recommend upgrading to the last version, so you can enjoy newly added functionalities or fix bugs from older versions.

We highly recommend using this package only for the hardware and software that meets producer's requests. Before installation, please make sure that you're not already running a newer version of the driver.

Installation steps (for exe / zip):

1. Save the driver files to your computer.
2. Run the executable or extract the installation files to a location on your disk.
3. Follow the steps displayed by the setup wizard.
4. After installation, restart the computer.

Important notes:

- Before installation, save all your work and close all the running programs, as the installation may interfere with other apps;
- If the setup wizard requests Administrative rights, make sure to run the setup as Administrator;
- Pay attention to all installation instructions to make sure the driver is installed correctly;

About RAID Driver:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related JMicron Drivers