D-Link DI-634M Router Firmware 2.01 Download

Posted at December 21, 2024 by PCI-DB Team

D-Link DI-634M Router Firmware 2.01 Description

Changes: 

1. Static IP support for PPPoE.
2. Dynamic IP support for LT2P and PPTP.
3. IGMP host and router support including multicast routing.
4. RIP full protocol support.
5. Added new Parental Control settings page.
6. SIP ALG issue with DVG-1402S router.
7. Fixed DNS Relay issue.
8. Fixed problems with configuring virtual server private IP address.
9. SBC-Yahoo DSL modem when WAN connection is established using the modem�s embedded PPPoE client.
10. Resolved problem with PPTP passthrough.
11. Changed default SSID to �dlink�.
12. Updated UPNP settings.
13. Enabled StreamEngine by default.
14. Ability to add multiple machines per Access Control policy.
15. Improved Automatic Rate Estimation process.
16. Enhanced logging functionality.
17. Enhancements to NAT and DMZ.
18. Removed L2TP ALG and combine IPSeC and L2TP ALG functionality.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers