D-Link DES-3526 Firmware 4.01 B19 Download

Posted at May 5, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	D-Link DES-3526 Firmware 4.01 B19
Category	Firmware
Manufacturer	D-Link
File Size	2.6 MB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

D-Link DES-3526 Firmware 4.01 B19 Description

Firmware update

Problems Resolved:
1. Can not apply created ACL rule via Web interface.
2. If configure port description contains more than 32 characters and use web browser to show it, the device will enter exception mode.
3. Device will enter exception mode when user delete SNMP user and try to get the mib OID1.3.6.1.6.3.
4. Fail to add Packet Content Mask if all "0" through SNMP
5. Can not display the long log messages completely.
6. Unable to save static ARP entries
7. The IfOctets and IfInOctets obtain the counter value from the same stastistics source.
8. IGMP_Snooping Router Time Out mechanism does not work correctly.
9. Can not leave IGMP Snooping group properly if there are more than one client in the same group.
10. Dynamic router port can not forward multicast data.
11. The "zoom in" and " zoom out" functions were opposite from SIM topology.
12. Correct typo "Enalbed" to �Enable� in Multicast router only setting.
13. Can not create the Access profile successfully via D-View.
14. Can not get parameter from some Bridge MIB tables via D-view 5.1.
15. Enabled igmp_snooping mutlicast configuration becomes disabled after rebooting
16. Port-based 802.1X problem: port is authorized, but ping failed.
17. Default VLAN can be deleted via web interface
18. Log bugs with RPS DPS-200.
19. Long convergency time when using 18 pcs devices to test RSTP function.

New features :
1. Password recovery
2. CPU Interface filtering
3. SIM R1.6
4. IP MAC Port binding ACL mode
5. Log enhancement
6. Telnet Client
7. Broadcast storm control granularity down to 1 pps
8. SIM base on system VLAN, , previously SIM only works on default VLAN
9. Editable login banner
10. Send trap in SNMP /Add warning message in syslog while access violation happens for IP MAC Port binding and port security
11. Initial Caps on the login
12. Disable the page mode in CLI
13. Enhanced Broadcast storm control ( port shutdown )
14. Forbid MC router or disable dynamic MC router
15. Safeguard engine includes broadcast storm filtering
16. Disable login banner
17. Hot-key to delete all the characters behind the cursor in CLI.
18. Max. port security learned address entries are enlarged from 20 to 64.
19. Change web panel for new xStack outlook

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers