VIVOTEK IB8369 IP Camera Firmware 0102a Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	VIVOTEK IB8369 IP Camera Firmware 0102a
Category	Network Card
Manufacturer	VIA
File Size	11.4 MB
Supported OS	OS Independent

VIVOTEK IB8369 IP Camera Firmware 0102a Description

This package provides the necessary installation files of VIVOTEK IB8369 Network Camera Firmware version 0102a.

New Feature:

01. Support EXT4 file system

Changed Features:

01. Motion detection algorithm enhancement
02. Update translation strings on VADP license
03. Fix the time zone settings of Russia
04. Fix ND8322P/ND8422P power up issue

Bugs Fixed:

01. Error occurs when Shepherd uploading package
02. RTSP over HTTP reply content-type return incompatible value
03. Support SDXC SD card format
04. Image would become dark if settings of power line frequency being changed by CGI command

Installation steps:

1. Download the latest firmware/
2. Open the Network Camera's main page.
3. Click on System > Maintenance.
4. Click Browse… and specify the firmware file.
3. Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade completes.

Note:

- If the upgrade is successful, you will see “Reboot system now!! This connection will close”. After that, re-access the Network Camera.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related VIA Drivers