D-Link DSR-500N Wireless Router Firmware 1.06B43 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	D-Link DSR-500N Wireless Router Firmware 1.06B43
Category	Firmware
Manufacturer	D-Link
File Size	24.6 MB
Supported OS	Windows All

D-Link DSR-500N Wireless Router Firmware 1.06B43 Description

Fixes:
- Reserved IP should be outside of the DHCP IP pool range: a user will not be allowed assign a static IP that is in the DHCP IP pool.
- Spillover is not working between PPPoE.
- PPTP compatibility issues with Android phones in the encryption mode.
- Need to remove "ANY" Service from Bandwidth traffic selectors services
- options: to avoid user's confusion when configuring bandwidth control.
- Dash board show blank page after running heavy traffic.
- LAN side VLC Receiver does not receive multicast traffic from VLC sender.
- Firewall has the highest priority than content filtering ->approved URL: Now white/black list owns the highest priority.
- Unable to send the Email logs to the SMTP server present in LAN side of the device.DSR web GUI can’t be accessed remotely through tunnel.
- Device is still using old certificates to access the web GUI after uploading new VeriSign-signed certificates.
- Unable to do NetBIOS from PPTP and L2TP Clients.
- LAN reserved IP's page got missed in I.E browsers if we set IE’s languages to French.
- PPTP connection is using MAC of WAN PHYs as gateway.
- Fail to save and configure IP addresses via CLI.
- When Inter-VLAN is disabled, clients still can access the WEB GUI and USB disk by using IP addresses in another VLAN.
- Support User-FQDN in IPSec policies.
- IP Aliasing causes errors when user configures Firewall rules without specifying host range.
- IP/MAC binding is not associated with DHCP reserved IP addresses.
- Skype can’t login through WIFI.
- Fail to auto-rollover to 3G dongle when it is configured as WAN2.
- IGMP control packet forwarding issue: LAN side VLC Receiver does not receive multicast traffic from VLC sender when DUT is behind NAT router.
- Compatibility issue between DSR devices and Android PPTP clients when enable encryption' is enabled in Both devices.
- Firewall has the higher priority than approved URL specified in content filtering.
- Fail to PING DNS server after fail-over to backup WAN2.
- During failover period, private LAN IP addresses will appear on the WAN side.
- DSR never reconnects to L2TP server after soft-reboot.
- In Windows environments, Google mail/Thunderbird client can't attach file size over 4MB.
- User can’t configure static routes VLAN interface through CLI.
- There are some incorrect statements in DSR WAN mode help.
- Unable to register sip client in android phone to the sip server over internet through the device.
- Device displays ""1i8nHTML missing"" messages while users try to configure the optional port to DMZ.
- LAN ports may be shut off when users import some special configuration files.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers