D-Link DWS-4026 rev.A1G Wireless Access Point Firmware 3.0.0.14 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	D-Link DWS-4026 rev.A1G Wireless Access Point Firmware 3.0.0.14
Category	Firmware
Manufacturer	D-Link
File Size	19.9 MB
Supported OS	Windows All

D-Link DWS-4026 rev.A1G Wireless Access Point Firmware 3.0.0.14 Description

Fixes:
- The master DWS-4026 fails to push AP configuration to the peer switch and the DWL-8600AP s managed by peer switch.
- DWL-8600AP s that are managed by a DWS-4026 become hung suddenly.
- DWL-8600AP s managed by a DWS-4026 may be incorrectly reported as rogue APs in the AP RF scan status and by the WLAN Visualization tool.
- After several days of normal operation, some DWL-8600AP s managed by a DWS-4000 switch begin to be inaccessible and can't be managed by the DWS-4026.
- No SNMP support is available to control client failure traps
- When placing an object on the WLAN Visualization graph, the object is not placed in the desired location.
- DWS-4026 might report its total number of associated clients incorrectly as on the WLAN Global Status and Associated Client Status page
- Client fails to associate with a DWL-8600 AP managed by a DWS-4026 with 802.1X or WPA-EAP authentication.
- The result is showed as error after compile with net-snmp.
- The DWS-4026 will not allow for the DHCP Server on the VLAN 1 to be specified in the Helper IP address. It will show an error message: “Error! adding the Helper IP Address”.
- The switch PoE feature reports an incorrect power budget, and the PoE usage threshold and per-port power limit do not work.
- Editing and changing the graph image multiple times through the “Edit > Edit Graph menu” in “WLAN Visualization Tool” function might cause the switch to automatically reboot.
- The WLAN > Monitoring > Client > Associated Clients page reports an incorrect value for the Encryption field of authentication clients.
- The RADIUS authentication keeps dropping out. After rebooting the switch, it all works for a while before failing again.
- After enabling the Captive Portal feature, the access to the network or management access to the switch through the Captive Portal might become unresponsive after a period of several hours or days.
- Sometimes AP stops passing DHCP packets to the clients. AP will work fine again after rebooting, but it will stop passing DHCP packets again later.
- When using Microsoft Windows 2008 server as DHCP and RADIUS Server, if accounting function on the RADIUS server is disabled but RADIUS Accounting related configuration on DWS-4026 is enabled, the clients can connect normally at the beginning, but can not authenticate successfully after several hours (< 1 day). The issue is due to out of RADIUS buffers on the switch that handles RADIUS accounting.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers