OTi-2168 Driver 2.9 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	OTi-2168 Driver 2.9
Category	Firmware
Manufacturer	Others
File Size	844 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

OTi-2168 Driver 2.9 Description

The flash disk controller (OTi-2168) is a USB2.0 mass storage class controller used to make a linear flash device array look likes a normal disk, hiding the flash related problems with erasing.

The OTi-2168 is a controller with USB interface. The USB interface is for high speed operation (480Mb/s). It conforms to USB Specification, Version 2.0. The USB transceiver is embedded in this controller. With stable slew-rate control, the controller reduces EMI.

The OTi-2168 has a Phase Lock Loop (PLL) embedded. The PLL provides all clocks needed in this controller. It needs an externally provided clock operating in 12MHz.

The OTi-2168 can control up to 8 pieces of flash memory. It has been optimized to support Infineon flash memory designs. The controller has write-protected ability to prevent writing data to flash. The controller has one LED control pin. You can program one of the display modes - operation, suspend, and standby, through provided production program. Comprehensive application software for security function with Windows OS is also available.

Features:
Mass storage class controller with Universal Serial Bus interface
USB Specification Compliance
Conforms to high-speed (480Mb/s) USB Specification, Version 2.0
Meet bus power specification
Integrated USB transceiver
Dynamic feedback control
Stable slew rate, independent of external loading
Integrated USB Serial Interface Engine (SIE)
Integrated RISC micro-controller
High-performance RISC architecture
Single cycle instruction execution
12 MHz external clock
3.3 V power operation
Integrated PLL
Support up to ?W pieces of Flash memory with write-protected ability
Support Infineon HYF33DS5128000ATC flash
Support wear-leveling algorithm
Higher reliability: ECC on the fly
Automatic bad block management
Supported OS:
Win XP, Win2K, Windows ME, Linux 2.4 above,and MAC OS 9.0 & higher
Win 98/Win98SE driver available
Mac 8.6 mass storage driver available from Apple
Multiple LUN Windows driver is available
Support Auto-Run feature
Configurable Vendor ID/Product ID (VID/PID)
Small form factor - standard 48-pin TQFP and LQFP (7mmX7mm) package

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers