Rosewill RC-217 PCI-E SATA II Card Silicon Image RAID Driver 1.5.23.0 64-bit Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Rosewill RC-217 PCI-E SATA II Card Silicon Image RAID Driver 1.5.23.0 64-bit
Category	Motherboard
Manufacturer	Silicon Image
File Size	245 KB
Supported OS	Windows 2003 ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Windows 7 64 bit

Rosewill RC-217 PCI-E SATA II Card Silicon Image RAID Driver 1.5.23.0 64-bit Description

Features:
- Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB 
- Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1
- Hot-plug capability
- Supports Serial ATA Generation 2 transfer rate of 3.0 Gb/s
- Supports SATA II First-party DMA commands for Native Command Queuing (NCQ)
- Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1
- Plesiochronous, Single PLL architecture, 1 PLL for 4 ports
- Supports four independent Serial ATA channels
- Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution
- 31 Commands and Scatter/Gather Tables per Port
- Supports bootable drive
- Four Pin header on board for LED connection
- RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate
- JBOD is a virtual disk that combines all disk drives as one entire disk drive
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
- Completely with drivers for Windows 2000 ,XP and 2003 Server
- Supports 64bit / 32bit Windows Vista
- Mac OS X v10.3.9 and v10.4 Non-booting driver supported by SiliconImage SiI3124.
- Linux 32bit / 64bit drivers supported for RHEL 4.0 Up2, RHEL 4.0 Up3, SuSE9.0 SP2, SuSE9.0 SP3 by SiliconImage SiI3124.
- Fully RoHS compliant

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Silicon Image Drivers