Rosewill RC-211 PCI-E SATA II Card Silicon Image RAID Driver 1.5.19.0 for Windows 7 64-bit Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Rosewill RC-211 PCI-E SATA II Card Silicon Image RAID Driver 1.5.19.0 for Windows 7 64-bit
Category	Motherboard
Manufacturer	Silicon Image
File Size	258 KB
Supported OS	Windows 7 64 bit

Rosewill RC-211 PCI-E SATA II Card Silicon Image RAID Driver 1.5.19.0 for Windows 7 64-bit Description

Features:
- Supports NCQ, Port Multiplier, Raid5, Raid10, Raid0, Raid1 and JBOD.
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB.
- Supports 1-lane 2.5Gbps PCI Express.
- Hot-plug capability.
- Fully compliant with Serial ATA 1.0 specifications.
- Supports two independent Serial ATA channels.
- Independent Link, Transport, and data FIFO.
- Independent command fetch, scatter/gather, and command execution.
- Supports Legacy Command Queuing (LCQ).
- Supports Native Command Queuing (NCQ).
- Supports Non-zero offsets NCQ.
- Supports Out of order data delivery NCQ.
- Supports FIS-based switching with Port Multipliers.
- 31 Commands and Scatter/Gather Tables per Port.
- Two Pin headers on board for LED connection.
- JBOD is a virtual disk that combines all disk drives as one entire disk drive.
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives.
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives.
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide.
- RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate.
- Raid 5 requires Port Multiplier and 3rd Drive.
- both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Silicon Image Drivers