Nikon 1 V1 Digital Camera Firmware 1.30 Download

Posted at December 22, 2024 by PCI-DB Team

Nikon 1 V1 Digital Camera Firmware 1.30 Description

Modifications enabled in this version:

- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function.
- Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
- 1 × magnification has been added to playback zoom for images captured in MF (manual focus) focus mode.
- The amount of time allowed to pass before normal display is restored when no operations are performed after playback zoom is applied has been reduced .
- When shooting in Electronic (Hi) release mode at 10 fps using the Mount Adapter FT1, the shutter speed displayed with a half press of the shutter-release button and that displayed when the shutter-release button was fully pressed differed. This issue has been resolved.
- The precision of time synchronization when the GPS Unit GP-N100 is attached to the camera and the Use GPS to set clock option is set to Yes has been increased. However, errors in time synchronization using GPS cannot be completely eliminated. Please update GP-N100 firmware to Ver. 1.02, which supports this improvement.

Precaution for upgrading firmware:

- The camera’s internal clock may be reset when the firmware is upgraded. If this occurs, set the clock to the correct date and time after the firmware has been upgraded using the Time zone and date item in the setup menu.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers