Nikon 1 V2 Digital Camera Firmware 1.10 Download

Posted at November 5, 2024 by PCI-DB Team

Nikon 1 V2 Digital Camera Firmware 1.10 Description

Modifications enabled in this version:

- 1 NIKKOR lens firmware can now be updated.
- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added. To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function. When updating both the camera and FT1's firmware, be sure to update the Nikon 1 V2 firmware before updating the FT1 firmware.
- Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
- 1× magnification has been added to playback zoom ratios for images captured in MF (manual focus) focus mode.
- Electronic viewfinder display in Auto and P, S, A, and M shooting modes is now smoother.
- An issue that caused images to be darker than expected when captured with continuous shooting using the Mount Adapter FT1 and an AF-S lens has been resolved.
- The precision of time synchronization when the GPS Unit GP-N100 is attached to the camera and the Use GPS to set clock option is set to Yes has been increased. However, errors in time synchronization using GPS cannot be completely eliminated. Please update GP-N100 firmware to Ver. 1.02, which supports this improvement.

Precaution for upgrading firmware:

- The camera’s internal clock may be reset when the firmware is upgraded. If this occurs, set the clock to the correct date and time after the firmware has been upgraded using the Time zone and date item in the setup menu.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers