TP-Link RE200 V1 Range Extender Firmware 160329 EU Download

Posted at December 22, 2024 by PCI-DB Team

TP-Link RE200 V1 Range Extender Firmware 160329 EU Description

New Features/Enhancement:

- Now the RE LED will be solid on and won't go off in 2 minutes any more after the WPS connection is established successfully.
- Improved the compatibility and stability of the device.

Bug Fixed:

- When going through the Quick Setup process and choosing to set SSID and MAC manually, the configuration won't be saved if click Next and then click Back.
- The device name identified by the root AP will not be RE200 after WPS connection is established.

How to upgrade TP-LINK Range Extender:

- After you downloaded the firmware, please use decompression software to extract the firmware file to a folder;
- Do NOT upgrade the firmware via wireless connection except
- Do NOT turn off the power or cut down the Ethernet cable during upgrade process;
- Because after upgrading the old settings may be lost, so please write down the key settings as a backup before you start to upgrade.
- Step 1 Log into the TP-LINK device by typing http://tplinkrepeater.net/ in the address bar of the web browser (such as Internet Explorer). The username and password are both admin unless you have changed it before.
- Step 2 Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
- Step 3 Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
- Step 4 Click Status, verify that the device’s firmware has been upgraded.
- Step 5 Then, check the status page of your device, if necessary please re-enter or reconfigure the device manually with the parameters you have written down before upgrading.

About Range Extender Firmware:

If you intend to apply this firmware, first go to the system information page of the extender and make sure that the currently applied version isn’t either newer or matching this release; you should get the downloadable package only after you have done this.

Updating to a new firmware can resolve vulnerability problems, fix various compatibility issues, enhanced existing features, correct different language-related errors, and improve overall performance and stability.

As for the installation steps, since there are numerous extender models, it would be best if you read and, above all, understand the update procedure before you proceed to applying the new firmware; this holds true even if you are a power user.

Bear in mind, that during the upgrade, you mustn’t use the device’s buttons or interrupt the process in any way. Doing so can cause serious malfunctions to the wireless extender.

Therefore, if this firmware satisfies your needs, get the desired version, and install it to your system; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers