Intel R1304EP4SHCN Server System EFI Firmware 02.06.E006 Rev. 2 Download

Posted at December 18, 2024 by PCI-DB Team

Intel R1304EP4SHCN Server System EFI Firmware 02.06.E006 Rev. 2 Description

Versions:

- System BIOS: 02.06.E006
- ME Firmware: 02.01.07.328
- BMC Firmware: 01.28.R11044
- FRUSDR: Platform Dependent

Changes:

- BIOS: Update new IVB microcode "med306e4_0000042c.pdb".
- BIOS: Update new SNB microcode "m6d206d6_0000061c.pdb"
- BMC: Point release to resolve Vulnerability of RC4/AES during clockwork scan
- ME Firmware: Fixed - Platform is not able to power on properly after being shut down by NM Policy
- ME Firmware: Fixed - Global platform power consumption reported by NM Statistics in S5 is incorrect
- ME Firmware: Fixed - OOB (out-of-band) stress test by issuing the wrong username may cause connection to be unavailable
- ME Firmware: Fixed - Shutdown action can be interrupted by cold reset when volatile NM policy is in use

UEFI iFlash32 Installation:

1. Boot the system to EFI Shell
2. Copy IFlash32.efi, ipmi.efi and BIOS.CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear the NVRAM) Notes: It is recommended to copy full package
3. Map the respective storage device in the system with the command Shell> map -r
4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
5. Run the IFlash32 utility at the prompt fs0:> IFlash32 [File Name] /u /ni
6. Either reboot the system and Go into BIOS setup <F2>, reset defaults <F9> and save <F10> or After the BIOS update and before rebooting, run: fS0:> Iflash32 -rd
7. Reboot the system

Backup BIOS update instructions:

1. Boot the system to EFI Shell
2. Copy IFlash32.efi, ipmi.efi and BIOS .CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear NVRAM). Notes: It is recommended to copy full package
3. Map the respective storage device in system with the command Shell> map -r
4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
5. Run the IFlash32 utility on the prompt fs0:> IFlash32 -u [File Name] UpdateBackupBios -ni
6. It will update primary BIOS with processed capsule, and the backup BIOS update will be completed in next normal boot.
7. Reboot the system.

Verifying updates

- Reboot the system
- During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
- Hit the F9 key to load BIOS Defaults
- At the MAIN menu verify the BIOS revision is correct
- Move cursor to the SERVER MANAGEMENT Menu
- Move cursor down to the SYSTEM INFORMATION Option and hit Enter
- Verify the BMC Firmware revision is correct
- Verify the SDR revision is correct
- Verify the ME Firmware revision is correct
- Hit the F10 Key to save changes and Exit

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

About BIOS Update Utility:

The Basic Input/Output System (BIOS) is a highly important piece of software that loads the currently installed operating system and tests all hardware components – so make sure you flash it correctly.

When it comes to changing the BIOS version, the update utility searches for a compatible package in any given location or on the web and, if found, it will automatically install the desired build, if and when your approval is given.

Do take into account that failing to perform the installation could seriously damage your system, and the faulty BIOS might even render it unusable.

Therefore, if you intend to upgrade your BIOS, hit the download button, get and install the package, and run the utility to check if a newer version is available. Don’t forget to check with our website as often as possible to be up to date with the latest releases.

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

In order to apply this package, it would be best if you carefully read and understand the instructions provided by your computer manufacturer, and perform the update only when you have completely familiarized yourself with the steps.

In addition to that, make sure you perform a system reboot after upgrading the firmware version in order to allow all changes to take effect properly.

That being said, if this release is compatible with all system characteristics, click the download button, and upgrade your firmware. Otherwise, check with our website as often as possible so that you find out when a compatible update becomes available.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers