Nikon D5 Camera Firmware 1.30 Download

Posted at November 2, 2024 by PCI-DB Team

Nikon D5 Camera Firmware 1.30 Description

Recall shooting functions:

- Added Recall shooting functions to the functions that can be assigned to camera controls. Holding the selected control recalls previously-saved exposure settings (including shutter speed and aperture), a feature that can for example be used to switch rapidly between scenes that require different exposures.
- Recall shooting functions can be assigned to the following controls using Custom Setting f1 (Custom control assignment): Preview button, Fn1 button, Fn2 button, AF-ON button, Sub-selector center, AF-ON button for vertical shooting, and Lens focus function buttons. It can also be assigned to the Fn button on a WR-1 or WR-T10 remote control using the Assign remote (WR) Fn button option in the SETUP MENU.

Fixed the following issues:

- If Backup or RAW Slot 1 - JPEG Slot 2 was selected for PHOTO SHOOTING MENU > Role played by card in Slot 2 in http server mode, the shutter would sometimes not be released during burst shooting.
- Reactivating the standby timer would sometimes fail to re-establish the link between the camera and some makes of mobile router connected via Ethernet cable (Prioritize power saving selected for SETUP MENU > Network > Options > Power saving).

Changes:

- The focal lengths displayed when teleconverters for AF-S or AF-I lenses are attached have been updated.
- The focal length displays for some combinations of lenses and teleconverters may differ from those given above.
- The SETUP MENU > Time zone and date > Time zone display now shows only the names of major cities in the currently selected zone.

Notice:

- Users of the software listed below will need to update to the following versions to support the changes in this firmware update: Camera Control Pro 2 version 2.25.1 or later, ViewNX-i version 1.2.8 or later

Viewing the Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Download and run the firmware to extract the following file to a folder named “D5Update”
- Using a card slot or card reader, copy .bin to a memory card that has been formatted in the camera.
- Insert the memory card into the Slot 1 on the camera and turn the camera on.
- Select Network in the SETUP MENU and confirm that OFF is selected for Network connection.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers