Ubiquity AirOS V Firmware 5.5.6.17762 Download

Posted at November 2, 2024 by PCI-DB Team

Ubiquity AirOS V Firmware 5.5.6.17762 Description

Regulatory updates:

- New: Lock country code for Ukraine
- Fix: Rocket M5 Titanium: DFS band unlock with authorisation key
- Fix: Remove DFS enable/disable option for EU/Switzerland, turn DFS ON after FW upgrade
- Fix: Update maximum EIRP from 20dBm to 23dBm for EU countries (indoor range)
- Fix: Update maximum EIRP from 20dBm to 23dBm for Vietnam (in frequency range 5150-5350 MHz)
- Fix: Regulatory update for Norway (5GHz band frequencies and EIRP limits update)
- WEB UI: Channel list with indication for Indoor channels (EU/Switzerland)
- WEB UI: Possibility to hide indoor channels (EU/Switzerland)

Fixes:

- Fix: Sometimes AP stops passing traffic in PtMP setup
- Fix: UAPSD power saving problems
- Fix: In some cases web server may lock up after some time due to memory leak (possible fix)
- Fix: Polycom SpectraLink 8030 wireless phone connection issues
- Fix: AirGrid M5 HP: Change Antenna gain from 28dBi to 27dBi according antenna specification

Supported products

- Bullet M2/M5/Titanium
- Rocket M2/M2 Titanium/M3/M365/M900/M5/M5 GPS/M5 Titanium/M6
- NanoStation M2/M3/M365/M5/M6
- NanoStation Loco M2/M900/M5
- NanoBridge M2/M3/M365/M900/M5
- AirGrid M2/M5/HP/HP New
- PowerBridge M3/M365/M5/M10
- PicoStation M2
- AirRouter/HP
- PowerAP N

About Network Adapter Firmware:

When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.

However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.

Updating the adapter’s drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.

To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don’t forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.

Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers