Convergent Design Odyssey7 Recorder Firmware 4.10.100 Download

Posted at December 22, 2024 by PCI-DB Team

Convergent Design Odyssey7 Recorder Firmware 4.10.100 Description

NEW FEATURES

HDMI RECORD TRIGGER:
- Start/stop recording on Odyssey from Panasonic GH4 (with new GH4 firmware) and Sony a7S.

HDMI TIMECODE SUPPORT:
- Capture timecode data from Panasonic GH4 (with new GH4 firmware) and Sony a7S.

1TB ODYSSEY SSD SUPPORT:
- Allows the use of the new Odyssey 1TB SSD in Odyssey monitor/recorder.

CUSTOM FRAME GUIDES:
- Up to four user-programmable frame guides in six color options. All four frame guides plus one preset frame guide can be displayed concurrently.

PLAYBACK NOTES:
- Expanding PLAY Markers functionality, a Notes text field is now available in Clip XML data as well as a Good/Bad take indication. Used in conjunction with new CD APPLE PRORES TRANSFER UTILITY 1.5, a Final Cut XML can transfer Markers and Notes to FCPX, FCP7, Adobe Premier and Resolve 10 & 11.

PSF VIDEO OUTPUT OPTION:
- Certain modes add choice of true progressive (p) or Progressive-Segmented Frame (psf) video output for expanded compatibility with other equipment.

OLED CALIBRATION CONTROLS:
- RGB Gain and Saturation controls added for the OLED display, with reset.

2K APPLE PRORES SUPPORT FOR CANON C500 @ 50P/60P:
- Record C500 2K @ 50p/60p in Apple ProRes 422 (HQ)

CD APPLE PRORES TRANSFER TOOL 1.5:
- Support for expanded Marker & Notes functions. Required for MAC OSX Yosemite compatibility. Java JRE 1.6 required. CD Apple ProRes Transfer Tool available for download on the Convergent Design website

FIXES & IMPROVEMENTS:

- FIXED HDMI input detection with Blackmagic HDMI to SDI Converter
- FIXED SDI input detection with Blackmagic SDI Studio camera (50p, 59.94p)
- FIXED Pixel Zoom image blackout when dragged to corner
- FIXED Pixel Zoom scrolling image when dragged to corner
- FIXED Safe Eject errors after mid-recording power loss
- FIXED Audio Gain adjustment
- FIXED FS700 low white balance clipping
- IMPROVED SSD menu function controls
- IMPROVED Screen Saver brightness
- IMPROVED Separate FS7 & FS700 camera selection in Odyssey menus
- IMPROVED Apple ProRes 47/48p Project Rate added
- IMPROVED LTC timecode trigger in HD ProRes
- IMPROVED Support to record 2K/HD @ 48p in Apple ProRes 422 (HQ)
- IMPROVED 4K Playback shows UHD center cut of 4K image

KNOWN ISSUES

MONITOR:
- Occasionally when zooming, the image will stretch, zooming again will correct.
- FS7 Cine S-Log3 / S-Log2 not currently supported

PLAY:
- Occasionally in Play there is an audible tone heard at the end of the file. Recording is unaffected.
- Custom name text may run out of box into other areas of the top menu when first entered.
- Play Markers created in previous firmware not supported.
- Occasionally Scrubbing while playing 4K ProRes can cause image stuttering.
- Occasionally Pausing during playback of 4K ProRes can cause image stuttering.
- Occasionally a playlist file starting timecode will read 0’s. Remove and reinsert SSD to correct.

RECORD:
- Occasionally HDMI input signals are not detected. Disconnect and reconnect HDMI plug to correct.
- Occasionally when switching modes to Canon 4K Raw to 4K ProRes, Odyssey fails to detect frame rate. To correct disconnect and reconnect the SDI input.

KNOWN ISSUES (FROM PREVIOUS RELEASE: 3.10.100)

AUDIO:
- SDI/HDMI outputs occasionally will not carry audio. Cycle Odyssey power to restore.
- SDI/HDMI audio occasionally will have a static pop when powering up.
- Audio will occasionally swap tracks when recording in DPX.
- Using Analog Audio and HDMI video, occasionally SDI, HDMI and headphone outputs do not carry audio.
- Audio output (headphones) occasionally flips channels.

MONITOR:
- Focus Assist in Edge Enhanced mode and recording Apple ProRes 422(HQ) shows edges as white instead of selected color.
- PIXEL ZOOM in RAW or DPX occasionally causes stretching of image. Recording is unaffected.
- Switching between ARRIRAW 1.5G DL and 3G DL occasionally can make the image incorrect on the OLED screen. Disconnect & reconnect one of the SDI inputs to correct. Recording is unaffected.
- SDI/HDMI outputs have a pink line in image on Canon C500 2K 12-bit/10-bit video. Recording is unaffected.
- IO Industries RAW files do not send color balance metadata to the Odyssey7Q so images appear incorrect. Recorded metadata color balance is set to 5600K but is not baked in.

PLAY:
- Very fast scrubbing can show bad colors. The image corrects after scrubbing completed.
- PLAY mode audio occasionally out of sync.
- Playlist occasionally reports timecode as “00:00:00;00”. Eject and re-insert the SSD to correct.
- PIXEL ZOOM in PLAY mode, 1080i60 not supported & will blank image. Recording is unaffected.
- Scrubbing RAW or DPX files occasionally causes the image to pixelate. The image corrects after scrubbing completed.
- FS700 2K RAW files occasionally show improper colors on initial selection of a clip. De-select and then re-select the clip to correct.
- FS700 RAW files occasionally show vertical line on right edge of frame. Recording is unaffected.
- F700 4K RAW 50p files occasionally do not play back audio. Recording is unaffected.
- FS700 RAW 30p and 60p files occasionally play with jitter. De-select and re-select to correct. Recording is unaffected.
- Multiple clip playback not supported in RAW formats.
- Canon UHD RAW occasionally plays back black image. De-select and re-select to correct. Recording is unaffected.

RECORD:
- Audio at the last few frames of an Apple ProRes 422(HQ) file occasionally records static. Add two seconds of pre- and post-roll to shots to avoid.
- ARRIRAW 4:3 mode is currently unsupported.

POST:
- FS RAW files appear green when imported directly into SpeedGrade. Pending Adobe update,import via dynamic link from Premier.
- Canon Cinema 4K half RAW 100/120 does not work in Adobe or Resolve Working with Adobe and BMD to resolve.
- In Resolve 11 Lite, FS700 RAW (CinemaDNG) files that are underexposed may appear green when using “Auto-Color” setting. Working with Blackmagic Design to resolve.

FIRMWARE UPDATE INSTRUCTIONS:

- Remove and safely store all files on your SSD, then format the SSD using your Odyssey7 or Odyssey7Q.
- Download the firmware update file (.ZIP) on this page to your computer and open/unzip the file.
- Open the downloaded folder (unzipping it if necessary). Copy the entire }ODYSSEY_UPDATE{ Firmware Update Folder from your computer to your SSD. It is important to copy the complete folder rather than individual files.
- Disconnect the SSD from your computer and insert into your Odyssey7 or Odyssey7Q device while the device is powered off.
- Power on your device. The firmware update will begin automatically and can take up to 30 minutes to complete (follow screen prompts).
- After update completes, power down your device and remove the SSD. (Press “PWR ON” button for 5+ seconds to power down your device).
- Connect the SSD to your computer and delete Firmware Update Folder.
- Before recording new material reformat all SSDs using the Odyssey7 or Odyssey7Q.

IMPORTANT:

- An Odyssey SSD or Odyssey Utility Drive is required for firmware updates. The Odyssey7 and Odyssey7Q cannot be connected to a computer via USB.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers