DFI KT600-AL PCB A BIOS 1.4 Download

Posted at December 3, 2024 by PCI-DB Team

DFI KT600-AL PCB A BIOS 1.4 Description

Specifications:

- CPU
AMD Athlon XP 266/333/400MHz FSB 
AMD Athlon 200/266MHz FSB 
AMD Duron 200/266MHz FSB 

- CPU Socket
Socket A

- Chipset
VIA chipset
North bridge: VIA KT600
South bridge: VIA VT8237

- Memory
Three 184-pin DDR SDRAM DIMM sockets
Supports up to 3GB memory (unbuffered DIMM)
Uses PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400) DDR SDRAM DIMM, 2.5V type

- BIOS
Award BIOS
2Mbit flash memory

- Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
Wake-On-PS/2 Keyboard/Mouse
Wake-On-USB
Wake-On-Ring
Wake-On-LAN
RTC timer to power-on the system

- Hardware Monitor
Monitors CPU/system temperature and overheat alarm
Monitors 12V/ 5V/3.3V/CPU/VBAT(V)/5VSB(V) voltages 
Monitors CPU/system fan speed
Read back capability that displays temperature, voltage and fan speed
CPU Fan Protection function during system boot-up
CPU Temperature Protection function during system boot-up

- Audio
AC'97 2.2 S/PDIF extension compliant codec
S/PDIF-in/out compressed digital output
6-channel audio output

- LAN
VIA 6103 LAN Phy
Full duplex support at both 10 and 100 Mbps

- USB
Supports 8 USB 2.0 (480Mb/second) / USB 1.1 (12Mb/second) interfaces.

- IDE
Supports ATA/33, ATA/66, ATA/100 and ATA/133 hard drives
UDMA Modes 3, 4, 5 and 6 Enhanced IDE (data transfer rate up to 133MB/sec.)

- Serial ATA with RAID
Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification 
(1.5Gbps interface)
Supports RAID 0, RAID 1 and JBOD

- AGP
Supports AGP 8x up to 2133MB/sec. and AGP 4x up to 1066MB/sec. bandwidth for
3D graphics applications

- Rear Panel I/O Ports
1 PS/2 mouse port
1 PS/2 keyboard port
4 USB 2.0/1.1 ports
1 LAN port
2 DB-9 serial ports
1 DB-25 parallel port
3 audio jacks: line-out, line-in and mic-in

- I/O Connectors
2 connectors for 4 additional external USB 2.0/1.1 ports
1 front audio connector for external line-out and mic-in jacks
2 internal audio connectors (AUX-in and CD-in)
1 surround connector
1 S/PDIF-in/out connector
2 SATA connectors
2 IDE connectors
1 floppy connector
1 ATX power supply connector
2 fan connectors

- Expansion Slots
1 AGP slot
5 PCI slots
PCB

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Dfi Drivers