Benq DW1640 firmware bsgb Download

Posted at April 29, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Benq DW1640 firmware bsgb
Category	Firmware
Manufacturer	Benq
File Size	879 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Benq DW1640 firmware bsgb Description

Performance
[DVD R DL]
Data Transfer Rate /double layer write: 88.64 Mbit/sec (8X)
[DVD R/ RW]
Data Transfer Rate /write: 177.28 Mbit/sec (16X)
Data Transfer Rate /rewrite: 88.64 Mbit/sec (8X)
[DVD-R/-RW]
Data Transfer Rate /write: 177.28 Mbit/sec (16X)
Data Transfer Rate /rewrite: 66.48 Mbit/sec (6X)
[DVDROM]
Data Transfer Rate /read: 177.28 Mbit/sec (16X, Max.)Access time: 120 ms
[CD]
Data Transfer Rate /write: 7200 KByte/sec (48X)
Data Transfer Rate /rewrite: 4800 KByte/sec (32X)
Data Transfer Rate /read: 7200 KByte/sec (48X, Max.)
Access time: 120 ms

Interface
E-IDE/ATAPI

Supported IDE mode
PIO mode 0/1/2/3/4
DMA mode 0/1/2
UDMA mode 0/1/2

Buffer Size
2 Mbytes

Writing Mode
[DVD R/ RW]
DVD Data and Video
[CD-R/-RW]
Track-at-Once, Disc-at-Once, Multisession, Packet Writing (fixed & variable packet), CD Digital Audio, Direct-Over-Write on CD-RW, Test Write

Disc Size
[DVD] 120 mm disc
[CD] 80 and 120 mm discs

Disc Formats
[DVD]
DVD R DL 8.5GB, DVD R 4.7GB, DVD RW 4.7GB, DVD-R 4.7GB (closed session), DVD-RW 4.7GB (closed session), DVD-Video, DVD-5, DVD-9, DVD-10, DVD-18
[CD]
CD-DA, CD-ROM XA (m1, m2f1/m2f2), CD-R, CD-RW, Bootable CD, Photo CD (single & multi-session), Video CD, Super Video CD, CD-Extra, Mixed-mode CD, CD-Text

Audio Performance
Signal-to-Noise ratio: 76 dB min.
Number of stereo channels: 2
Analog audio line output: 0.75 VRMS at 470 Ohm
Analog headphone output: 0.6 VRMS at 34 Ohm
CD sampling frequency: 44.1 KHz

Power Requirement
5V? 5%, ripple: 100mVpp
12V ? 10%, ripple: 200mVpp

Environment Conditions
Operating temperature:
5 0C~50 0C (410F~1220F) at humidity of 8-80% RH
Non-operating temperature:
-40 0C~60 0C (-40 0F~140 0F) at humidity: 5%~95% RH

Reliability Characteristics
MTBF: 125,000 POH (20%)
Non-recoverable read error < 1 block in 1012 bits (CD and DVD)

Physical Characteristics
Dimension: 146 X 42 X 178 mm (W x H x D)
Weight: 820 g

Firmware Update
Flash memory upgradeable

Panel Design
Front side:
open/close button and read/write status indicator LED
Rear side:
40-pin ATA-2 dual row flat-cable connector, 4-pin DC power connector, 3-position device jumpers, digital audio output and analog audio output

OS Compatibility
Windows XP, 2000, ME, 98SE

Minimum System Requirements
IBM PC compatible
Pentium III 550MHz CPU
128MB DRAM
100MB free HDD space for CD/DVD recording related software installation
1GB free HDD space for CD Image recording (10GB for DVD authoring) is recommended.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Benq Drivers