Nikon 1 V2 Camera Firmware A:1.21/B:1.21 for Mac OS Download

Posted at November 6, 2024 by PCI-DB Team

Nikon 1 V2 Camera Firmware A:1.21/B:1.21 for Mac OS Description

Fixes:

- Fixed issue that caused Eye-Fi wireless upload to stop functioning if a control other than the movie-record button was used to end filming when movies were being recorded to an Eye-Fi card.

Notice:

- Updating the firmware may reset the camera clock.
- The clock can be set to the correct date and time using the Time zone and date option in the setup menu.

Check Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the setup menu to display the camera firmware version.
- Check the camera firmware “A” and “B” versions.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Save the downloadable file to the folder created in Step 1.
- Run it to extract the following file to a folder named “V2Update”: V2_0121.bin (the camera firmware)
- Using a card slot or card reader, copy “V2_0121.bin” to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the it on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers