Chaintech 9BJA Bios 1.03 Download

Posted at November 18, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Chaintech 9BJA Bios 1.03
Category	Bios
Manufacturer	Chaintech
File Size	200 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Chaintech 9BJA Bios 1.03 Description

CPU Supports the Intel Celeron/PentiumR 4 Socket 478 CPU

Supports the Intel Celeron/PentiumR 4 System bus at 400MHz

Chipset Intel 845 ICH2

Main Memory Three 168-pin SDR DIMMs up to 3GB

Supports PC133 SDRAM modules


Expansion Slots One 1.5V AGP slot for 2X/4xAGP (v2.0 compliant)

Five 32-Bit PCI slots (v2.2 compliant)

One CNR slot support modem, audio and LAN riser

Audio Subsystem Onboard audio 8738


Full-duplex operation for simultaneous recording and playback

6 Channel speaker audio support

Embedded 32OHM 5w earphone amplifier

Support MIDI and game port

32 Voice HRTF 3D positional audio, CRL 3D supports MS Direct

Sound3D, Aureal A3D and Creative EAX APIs


Video Subsystem 4X AGP

UltraDMA IDE Ports Two UltraDMA-66/100 IDE Ports


Supports PIO Mode 4 up to 16.6 Mbps, Multi-Word DMA Mode 2 and Ultra DMA mode 5 up to 100MB/s with Bus Mastering

Bus-Mastering software drivers for all common multitasking operating systems


Embedded USB Controller UHCI compliant USB host controller with Root hub

Four USB ports (UHCI v1.0 compliant) with over-current protection

Optional USB adapter for additional USB ports


On Board Super I/O Controller ITE 8712 LPC I/O with system monitors hardware

Three UARTs support two serial port and IR function (up to 115.2Kbps) for HPSIR and ASKIR

One SPP/ECP/EPP parallel port

One floppy disk drive connector supports up to 2.88MB

Integrates smart card reader function and interface, to be qualified for meeting PC/SC standard

Embedded system monitoring 8 external voltage inputs

2 temperature sensing for CPU and system

2 Fan speed (CPU and system) monitoring

Boot-Block Flash ROM Award system BIOS support PnP, APM, DMI, ACPI, & Multi-device booting features

Software Driver CD (Chipset Autodetect)
Value Pack

Other feature Back panel I/O connector

One PS/2 mini-DIN mouse and keyboard ports
Two USB Ports
Two 9-pin D-SUB male Serial port
One 25-pin D-SUB female parallel port
Audio Line-in, Line-out and Mic-in jacks
One 15-pin D-SUB female game/MIDI port
On board connector for external device

Two 3x1 pin fan connector
5x2 pin two USB ports connector for front side USB
6x2 pin Infrared connector
3x1 pin wake on LAN connector with housing
5x1 pin alarm on LAN connector
4x1 pin CD-in connector with 2.54mm pitch housing
4x1 pin Aux-in connector with 2mm pitch housing
4x1 pin Mono-in connector with 2mm pitch housing
4x2 pin woofer/center connector for 6 channel audio
9x2 pin front side audio connector
9x2 pin front panel connector
7x2 pin Smart Card Reader connector
17x2 pin floppy connector

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Chaintech Drivers