Chaintech 7NJL3/4 Bios 1.06 Download

Posted at April 29, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Chaintech 7NJL3/4 Bios 1.06
Category	Bios
Manufacturer	Chaintech
File Size	220 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Chaintech 7NJL3/4 Bios 1.06 Description

Form Factor ATX(305mm x 230mm)
CPU Supports AMD Socket A Duron/Athlon/Athlon XP CPU
System clock supports 200/266/333/400MHz
Chipset NVIDIA nForce2 Ultra 400 MCP
Main Memory Three 184 pin DDR DIMMs up to 3GB
Supports PC1600/2100/2700/3200 Dual-Channel DDR modules
Expansion Slots One universal-AGP slot for both 4X/8XAGP
Five 32-Bit PCI slots (v2.2 compatible)
One ACR slot supports modem, audio and LAN riser
Audio Subsystem Full-duplex operation for simultaneous recording and playback
6 Channel speaker audio supports
Embedded 32OHM 5w earphone amplifier
Supports MIDI and game port
32 Voice HRTF 3D positional audio, CRL 3D supports MS Direct
Sound3D, Aureal A3D and Creative EAX APIs
Video Subsystem Video : 8X AGP
UltraDMA IDE Ports Supports two IDE ports up to 4 ATAPI devices
Supports PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps, Multi Word Mode 5 up to 100MBps and Multi Word Mode 6 up to 133MBps with Bus Mastering
Bus-Mastering software drivers for all common multi-tasking operating systems
Embedded USB Controller Embedded USB1.1/2.0 Controller
Three EHCI USB 2.0 Controller support total 6 USB 2.0/1.1 Ports
Support USB 2.0 High-Speed Device @480 Mb/s Transfer Rates
On Board Super I/O Controller ITE 8712 LPC I/O with system monitors hardware
Two UARTs support serial ports and IR function (up to 115.2Kbps) for HPSIR and ASKIR
One SPP/ECP/EPP parallel port
One floppy disk drive connector supports up to 2.88MB
Integrates smart card reader function and interface, to be qualified for meeting PC/SC standard
Embedded system monitoring 8 external voltage inputs
2 temperature sensing for CPU and system
2 Fan speed (CPU and system) monitoring
Boot-Block Flash ROM Award system BIOS support PnP, APM, DMI, ACPI, & Multi-device booting features
Software Driver CD (Chipset Autodetect)
DigiDoc System Monitoring Utility
Value pack 2002/2003

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Chaintech Drivers