Posted at December 25, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | TRENDnet TEW-825DAP v1.0R Access Point Utility 1.50 |
---|---|
Category | Router Switch Access Point |
Manufacturer | TRENDnet |
File Size | 21.4 MB |
Supported OS | Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 |
- Fixed bugs in user interface.
- Added capability to configure NTP server, time zone, DNS, 802.1x, 802.11k settings
- Added capability to configure channel width, bandwidth control, RSSI scanner, transmit power settings
- Added display status if discovered access points are managed by wireless controller
- Added capability to load configuration settings from a backup file to multiple access points.
- Added capability to reset multiple access points to factory default.
- Added capability to export access point list to editable .csv, and load channel settings from .csv file
- (.csv capability requires TEW-755AP FW:1.04 or above, TEW-821DAP FW:1.06 or above, TEW-825DAP FW:1.02 or above)
- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.
Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.
Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.
Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.
It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.
That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Firmware File Size: 957 KB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Network Card File Size: 2.3 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Network Card File Size: 722 KB Windows 2K ,Windows XP
Install DriverDevice Type: Firmware File Size: 5.5 MB OS Independent
Install DriverDevice Type: Firmware File Size: 1.6 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Firmware File Size: 2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Network Card File Size: 20 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Network Card File Size: 2.8 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Network Card File Size: 2.6 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Network Card File Size: 2.9 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.