ASUS H61M-F Intel Chipset Driver 9.3.0.1021 for Windows 8 Download

Posted at December 24, 2024 by PCI-DB Team

ASUS H61M-F Intel Chipset Driver 9.3.0.1021 for Windows 8 Description

Specifications:

CPU:
- Intel Socket 1155 for 3rd/2nd Generation Core i7/Core i5/Core i3/Pentium/Celeron Processors
- Supports Intel 22 nm CPU
- Supports Intel 32 nm CPU
- Supports Intel Turbo Boost Technology 2.0

Chipset:

- Intel H61(B3)

Memory:

- 2 x DIMM, Max. 16GB, DDR3 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1600 / 1333 / 1066 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture

Graphics:

- Integrated Graphics Processor
- Multi-VGA output support: DVI-D/RGB ports 
- Supports DVI-D with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 2048 x 1536 @ 75 Hz
- Maximum shared memory of 1024 MB

Expansion Slots:

- 1 x PCIe 3.0/2.0 x16
- 2 x PCIe 2.0 x1

Storage:

- Intel H61(B3) chipset: 4 x SATA 3Gb/s port(s), blue

LAN:

- Realtek 8111F, 1 x Gigabit LAN Controller(s)

Audio:

- Realtek ALC887 8-Channel High Definition Audio CODEC

USB Ports:

- Intel H61(B3) chipset: 6 x USB 2.0 port(s) (4 at back panel, black, 2 at mid-board)
- ASMedia ASM1042 controller: 2 x USB 3.0/2.0 port(s) (2 at mid-board)

Back I/O Ports:

- 1 x PS/2 keyboard (purple)
- 1 x PS/2 mouse (green)
- 1 x DVI-D
- 1 x D-Sub
- 1 x LAN (RJ45) port(s)
- 4 x USB 2.0
- 3 x Audio jack(s)

Internal I/O Ports:

- 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
- 1 x USB 2.0 connector(s) support(s) additional 2 USB 2.0 port(s)
- 4 x SATA 3Gb/s connector(s)
- 1 x CPU Fan connector(s) (4 -pin)
- 1 x Chassis Fan connector(s) (4 -pin)
- 1 x 24-pin EATX Power connector(s)
- 1 x 4-pin ATX 12V Power connector(s)
- 1 x Front panel connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x Internal speaker connector(s)
- 1 x Clear CMOS jumper(s)

Form Factor:

- uATX Form Factor
- 8.9 inch x 7.0 inch ( 22.6 cm x 17.8 cm )

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers