EVGA C606 Classified SR-X BIOS 1.03 Download

Posted at November 2, 2024 by PCI-DB Team

EVGA C606 Classified SR-X BIOS 1.03 Description

Fixes:

- Update menu items
- Fix system cannot boot when VCore or VSA voltage set too low
- PCI-E improvements
- Fix compatibility with GTX 980

Windows Installation:

- Download the .zip file for your motherboard
- Close all open programs
- Go into the folder where you unzipped this package and run Windows_Update.bat
- Press any key to continue
- Click YES when the User Account Control message appears
- Press Y in to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down after a key is pressed. Then power on again and go into BIOS to setup.

USB Flash/DOS Drive Installation:

- Create a bootable disk.
- Extract the above .zip file to your bootable disk.
- From a DOS prompt, run DOS_Update.bat
- Press Y in to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, shut the system down completely. Then power on again.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EVGA Drivers