ECS NM70-I2 (V1.0) VIA HD Audio Driver 10.900a Download

Posted at December 22, 2024 by PCI-DB Team

ECS NM70-I2 (V1.0) VIA HD Audio Driver 10.900a Description

Features:

- CPU
Onboard Intel Celeron 847/807 processors
TDP: 17W
Solid Capacitor for CPU side

- CHIPSET

Intel NM70 Express Chipset

- GRAPHICS

Supports DirectX 10.1

- MEMORY

Supports DDR3 1333/1066 non-ECC, Un-buffered SDRAM Memory
2 X 240-pin DDR3 DIMM socket

- EXPANSION SLOT

1 X PCI Express X16 Gen 2.0 slot(s)

- STORAGE

Support by IntelNM70 Express Chipset
1 X Serial ATAIII 6Gb/s
3 X Serial ATAII 3Gb/s

- Audio

VIA 1705
VIA VT1705 6-channel High Definition audio CODEC
Compliant with HD audio specification for a whole new immersive surround sound experience
3 DACs and 2 ADCs with High-performance ADCs with 100dB SNR, DACs with 100dB SNR
Low Power Consumption
Capability for “full rate” BluRay / DVD / HD DVD support.LAN

-  LAN

Realtek 8111E Gigabit Fast Ethernet Controller
Realtek 8105E 10/100Mbps Fast Ethernet Controller optional

- USB

Support by NM70 Express Chipset
4 X USB2.0 port(s) Up to 2.5Gb/s
Back Panel 4 port(s)
Onboard 4 port(s)

- REAR PANEL I/O

1 X PS/2 Keyboard & PS/2 mouse connectors
1 X Serial port (COM)
1 X Audio port (Line Out/Line In/Mic In)
1 X HDMI port(s)
1 X DVI-I port(s) (optional)
1 X D-Sub (VGA) port(s)
4 X USB2.0 port(s)

- CONNECTORS & HEADERS

1 X 24-pin ATX Power Supply connector
1 X 3-pin SYS_FAN connector
1 X Front Panel switch/LED header
1 X Front panel audio header
1 X Onboard Buzzer
4 X USB 2.0 header
1 X S/PDIF out header
1 X SATA III 6Gb/s connector(s)
3 X SATA II 3Gb/s connector(s)
1 X CLR_CMOS header
1 X Parallel port header (LPT)
1 X Chassis intrusion header
1 X LVDS connector (optional)

- SYSTEM BIOS

AMI BIOS with 32 MB SPI Flash ROM
Over-Clocking
Multi-Language BIOS

- FORM FACTOR

Mini ITX Form Factor
170mm X 170mm

- Certifications

CE/FCC Certification
ErP/EuP Certification
WHQL Certification
WHCK Certification

About Sound Card Driver:

Usually, Windows operating systems apply a generic audio driver that allows computers to recognize the sound card component and make use of its basic functions.

When enabled by proper files, the characteristics of the sound card (like model, manufacturer, number of channels) are completely available to computers, and all its features are made accessible.

Updating the audio version can improve sound quality, resolve different compatibility issues, fix related errors spotted throughout the product’s usage, add support for new operating systems, and bring various other changes.

As for applying this package, the steps are quite simple since each producer intends to uncomplicate things for users: just download the package, run the setup, and follow the on-screen instructions.

Bear in mind that, even though other operating systems might be compatible as well, it is not recommend that you apply any software on platforms other than the specified ones. Also, when the installation has finished, do perform a restart to ensure that all changes take effect properly.

Therefore, if you wish to install this audio version, click the download button and apply the package. Remember to check with our website as often as possible to stay “updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related VIA Drivers