ASUS RT-N11P Router Custom Firmware 3.4.3.8.088 Base Download

Posted at November 5, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ASUS RT-N11P Router Custom Firmware 3.4.3.8.088 Base
Category	Router Switch Access Point
Manufacturer	ASUS
File Size	4.3 MB
Supported OS	OS Independent

ASUS RT-N11P Router Custom Firmware 3.4.3.8.088 Base Description

This package includes a customized firmware developed by Padavan that is targeted at some of ASUS’ routers. The present build brings new improvements, functions, bug fixes, and configurations, and can also boost the overall performance of the device.

ATTENTION:

1) After the first upgrade from official firmware, all settings will be erased. Do not load settings (CFG file) from official firmware!!!
2) After upgrade from any official ASUS firmware, WAN MAC address for RT-N14U is dynamically changed (not permanent) in last octet. Please check MAC binding from your ISP.
3) If your current custom firmware version is N56U 1.1.2.2-006 or lower, it is absolutely necessary to save your settings to a .CFG file using WebGUI BEFORE upgrading to a newer version. After the upgrade, restore your settings from the saved .CFG file in a usual way.

WARNING: Features NO LONGER AVAILABLE:

- WPS/WSC (completely disabled due to the serious security hole).
- ASUS Download Master is no longer supported. It was replaced by Transmission.

After uprgade to 3.X.3.8-085 (and higher) from any previous builds, please:

- Clear browser cache to properly render WebUI pages.
- Sync OpenVPN client and server settings with new controls.
- Update region time zone (for Russia only).
- Remember that the manual NVRAM reset is not required.

After manual NVRAM reset:

- Both Wireless AP security is WPA2-Personal with pre-shared key 1234567890 by default.
- HTTP and Telnet/SSH login: password is admin:admin by default.

Changes:

- Added support NAPI to Wired GMAC driver.
- Added support 64 bit interface counters to Wireless drivers.
- Added traffic counters to WebUI Internet stats on WISP mode.
- Added Vendor Class Identifier field to WAN DHCP client.
- Added ability to usage udpxy and xupnpd in AP mode.
- Migrated multicast-to-unicast (M2U) transform from Wireless drivers to Linux bridge. Improved multi-clients environment.
- Updated APSoC Wireless driver to 2.7.2.0.
- Updated OpenVPN to 2.3.6.
- Updated miniupnpd to 1.9.20141128.
- Updated dropbear SSH to 2013.66.
- Fixed PPPoE driver (ignore incoming wrong PADT packets to protect session).
- Fixed RTL8367 IGMP snooping (ignore snooping for reserved L2 groups).
- Fixed init Ralink EHCI on router startup.
- Fixed direct toggle Wireless bridge modes WISP <-> LAN from WebUI.

Base build Description:

[x] Linux kernel-3.4.105+ (with upstream backports).
[+] IPv6 full support (native and SIT tunnels).
[+] IPSET kernel modules.
[+] openvpn (security VPN client/server).
[+] openssl binary (allow generate certificates for openvpn/https).
[+] https server for WebUI.
[+] xupnpd (multicast IPTV->UPnP proxy).
[+] dropbear (SSH client/server).
[+] tcpdump utility.
[-] QoS kernel modules.
[-] IFB/IMQ kernel modules.
[-] NFS client kernel modules.
[-] CIFS client kernel modules.

Note:

- [x] > Mandatory
- [+] > Included
- [-] > Excluded

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASUS Drivers