Intel NUC RST Driver 13.5.0.1056 Download

Posted at December 22, 2024 by PCI-DB Team

Intel NUC RST Driver 13.5.0.1056 Description

Fixes:

- Longer shutdown time with certain 8 GB SSHD while Hybrid Hinting is enabled
- WHCK-PC Resume test fails as total resume times exceed 2000ms
- Media detection and tray ejection takes minutes to occur
- ODD detection time is longer than expected
- SMART event (4102) logged as a bad block event (4103) in Windows system event log
- ZPODD: BSOD when “external’ tray based ZPODD is removed while asleep
- Rstcli does not show disk link speed
- RST tray icon picture needs higher resolution picture
- ZPODD: Tray based zpodd device not waking up correctly from sleep.

Intel Rapid Storage Technology Release is designed to provide functionality for the following Storage Controllers:

- Intel 9 Series Chipset Family SATA AHCI/RAID Controller
- Intel 8 Series/C220 Series Chipset Family SATA AHCI/RAID Controller
- Intel 7 Series/C216 Series Chipset Family SATA AHCI/RAID Controller
- Intel C600 Series Chipset SATA AHCI Controller

This download is valid for the products listed below.

- Intel NUC Board NUC5i3MYBE
- Intel NUC Board NUC5i5MYBE
- Intel NUC Kit NUC5i3MYHE
- Intel NUC Kit NUC5i3RYH
- Intel NUC Kit NUC5i3RYK
- Intel NUC Kit NUC5i5MYHE
- Intel NUC Kit NUC5i5RYH
- Intel NUC Kit NUC5i5RYK

This package contains the files needed for installing the Intel Rapid Storage Technology (RAID) driver version 13.5.0.1056 for Intel NUC. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

Known Issues:

- Driver: CE BSOD iastorA.sys occurs while uninstalling 13.5 on a 3rd Party Windows 8.1 OS
- UI - PCI-E SSD custom space defaults at 64 GB, even if the drive has less than 64 GB of space left
- SSD/HDD model name in Win7 Device Manager will be changed incorrectly after RST driver installed.
- Driver: 7A BSOD when waking from S4 on Remapped Platforms
- Enabling/Disabling SRT on system with hot-plug disabled hangs system
- Cache fail results in hangs/BSOD
- UI: BSOD when clicking "Hide recovery disk files" actionable link with On request RRT Volume.
- UI: System drive is not displaying or being recognized in RST UI
- Iastor BSOD when auto rebuilding volume to the same port
- SRT filecopy performance much worse than HDD
- Sleep and PNP (disable and enable) with IO Before and After (Certification) on certain configurations
- UI Writeback Cache checkbox (Advanced tab) disabled during IRRT volume creation
- All expected TRIMs are not occurring on SRT
- "Offline" disk shows up as "Normal" after reinserting back into system while RAID 5(or RAID 10) is rebuilding and restarting system
- BSOD 9f occurs when certain PCIe-AHCI SSD is attached.
- After multiple iterations of Hybrid S3 or S4, the sleep utility tool indicates errors when RST driver is installed.
- OS Spindown of matrix RAID volumes causes hang
- SMART Event disk rebuilding after system reboot of successful Raid 1 creation
- internal_power_error (A0) BSOD with hybrid S3
- BSOD 0xD1 reported with inbox driver 12.0.1.1018
- No timeout for a device that does not enumerate and stalls the OS boot process
- Refresh issues when changing from Windows default theme to high contrast
- After configuring SRT and conducting Dirty Shutdowns error: Unable to find System Disk
- RST Driver – Test hangs while running Inquiry command on ODD
- SRT: Driver fails to enumerate an accelerated disk or volume during an F6 install if a system disk is already attached to the system
- UI reports Unknown status and incorrect sync mode after hot-removing the recovery disk of an IRRTm while the sync is initializing.
- WHQL: RST not compliant with Device.DevFund.Memory.DriverFootprint requirements for x86
- ZPODD power off timer does not reset upon receipt of CSMI I/O

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers