FiiO X3 Mark III Portable Player Firmware 1.2.4 Download

Posted at December 31, 2024 by PCI-DB Team

FiiO X3 Mark III Portable Player Firmware 1.2.4 Description

The following changed and improvements have been made to the FW1.2.4 compared to the FW1.2.1:

1. Added the USB DAC adaption to Mac computers;
2. Added Italian language support;
3. Improved the random stutter issue when playing some APE tracks locally;
4. Changed the "Reset media library" option (under System settings) to "Reset database" (you can use this option to reset the media library and also the Bluetooth data);
5. Miscellaneous improvements and bug fixes.

Steps to Upgrading via microSD card:

- Please ensure that the X3MKIII is adequately charged (preferably fully charged) before the upgrade so to prevent power failure during upgrade.
- Choose a card with FAT32 file system (recommended). A micro SD card with exFAT or FAT file system also can be used to upgrade the X3MKIII.
- Insert the card into the card slot of the X3MKIII and connect the player to the computer via USB
- Copy the downloaded firmware file named X3_Mark_Ⅲ.fw to the root directory of the micro SD card. (If you have downloaded the .zip firmware package, you'll also need to unzip it first. Of course, if it is already the .fw file, then there is no need to unzip it.). Please do not rename the firmware file. The X3MKIII will NOT recognize the firmware file if you rename it.
- Disconnect the X3MKIII from the computer and turn it off.
- Hold the “Shortcuts” key (the key to the upper left of the touch wheel) and then press the “Power / Lock” button to turn on the X3MKIII. The following firmware upgrade dialog will appear. Firmware updating - then - Firmware updating successful
- Do not press buttons or turn the dial on the X3MKIII while the upgrade is in progress.
- When the firmware upgrade is complete, the X3MKIII will restart automatically.
- It is suggested to delete the X3_Mark_Ⅲ.fw file from the micro SD card after the update is complete.
- Please update the media library again after the firmware update.
- If the update process fails, please change to use a blank microSD card with capacity under 32GB, and directly format it by the X3MKIII before upgrading again.
- The original file data in the micro SD card will not get corrupted when upgrading.
- There is no need to update each firmware, and please just load the latest firmware and upgrade the unit directly.
- You can check the firmware version by "System settings"->"About X3".

About Music Player Updates:

In case your device has encountered various problems that this release can fix, or if the same release comes to add certain features that you can make use of, then you should definitely take into account upgrading.

Usually, to do that, you must get the downloadable file (unpack it if necessary) and transfer it to the player through any available method, and start the upgrade process from the device's setup menu.

However, given the large variety of music players and the many ways to enter update mode, it would be best if you read the product's installation guide and initiate this task only when you have familiarized yourself with the steps.

To apply this firmware, take into account all the aspects mentioned above, hit the download button and update your music player. In addition to that, make sure you constantly check with our website to stay “updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers