Amcrest ATC-801 Camera Firmware DV 3.3.016 Download

Posted at April 25, 2024 by PCI-DB Team

Amcrest ATC-801 Camera Firmware DV 3.3.016 Description

Features:

- 8 Megapixel
- 720p High Definition Video
- 36 IR LEDs for Night Vision up to 20m(65 ft)
- SD Card 8MB ~ 32GB
- IR Triggers for Fast-Action Snapshots and Recording
- 2.0 Inch LCD Display
- Battery or DC Powered

Please follow these instructions to update the firmware.

1. Copy the FWF900.bin file to a SD card.
2. Insert the card into the camera.
3. Turn on the camera to Test mode.
4. The camera will automatically read the SD card and start the update. While the camera is updating, the screen will be black. Do not remove the power supply or turn it off as this will cause the update to fail.
5. Once the update has finished the screen will turn on.
6. Turn off the camera, remove the FWF900.bin file from the card, then reinsert it.

Your camera has now been successfully updated.

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related AMCREST Drivers