Vantec NST-375LX-WH Enclosure Firmware 4.6 Download

Posted at December 18, 2024 by PCI-DB Team

Vantec NST-375LX-WH Enclosure Firmware 4.6 Description

Updates and changes made in this release:

- Feature: Support for quick firmware upgrade utility (PC only)
- Feature: Support for NetBench v7.0.3
- Bugfix: Could not rename the files
- Bugfix: Could not delete files larger than 4GB
- Bugfix: SAMBA write config policy
- Bugfix: DHCP client write config policy
- Bugfix: RAM/FLASH file system allowed seeking over file size
- Bugfix: Web GUI scan disk and format disk policy

How to upgrade the NexStar LX firmware:

For PC only:
- Run the LX-Upgrade-Utility.exe
- It will scan your network for NAS devices. Select the unit you wish to upgrade.
- Browse for the new firmware: LX-Firmware-BASIC46.bin.
- Click Upgrade.
- Power cycle or log into the web interface and reboot.

Or:
- Log into the web interface.
- Go to the Maintenance page.
- Under Firmware Upload, browse for the new firmware: LX-Firmware-BASIC46.bin.
- Click UPLOAD.
- When firmware update is complete, click REBOOT.

About HDD Firmware:

Updating the HDD’s (Hard Disk Drive) firmware version can fix various problems that might occur, enhance some of the features available or add support for new ones, and improve the unit’s overall performance.

However, as this task can be very risky, applying a different firmware is recommended only when the newer version specifically resolves an issue that bothers you, or brings about changes that you can make full use of.

In addition to that, make sure you perform this task only in a steady power environment (such as the one ensured by a UPS unit).

As for the update process, due to the wide variety of HDDs and various methods provided by each manufacturer for installing a new firmware, it would be best if you carefully read and understand the installation steps.

That being said, if you consider updating the HDD to this firmware version, click the download button, and make sure you read the installation guide before initiating the upgrade. Moreover, constantly check with our website to stay up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Vantec Drivers