Bushnell Trophy Cam 119445cn Camera Firmware BS680BWNx02020 Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Bushnell Trophy Cam 119445cn Camera Firmware BS680BWNx02020
Category	Scanner Digital Camera Webcam
Manufacturer	Bushnell
File Size	3.7 MB
Supported OS	OS Independent

Bushnell Trophy Cam 119445cn Camera Firmware BS680BWNx02020 Description

This package provides the necessary installation files of Bushnell Trophy Cam 119445cn Camera Firmware BS680BWNx02020.

Note:

- This is the NON-US Model of Bushnell Trophy Cam 119445 camera

Installation steps:

1. Save downloaded files to a blank SD Card (16GB card or smaller - 8GB or smaller on 119425/119425C). Make certain that the software update corresponds to the model that you wish to update. If you install this update to a x01 camera or you don’t match the software to the model number, you could erase your camera memory permanently.
2. Put 8 New batteries into Trophy Cam (WARNING—THIS IS A CRITICAL STEP. IF POWER IS INTERUPTED DURING UPDATE, THE CAMERA MEMORY MAY BE PERMANENTLY ERASED.)
3. Insert SD card into unit.
4. While pressing and holding the UP/VIDEO button, switch unit to SETUP. (Note the camera will appear as if it is NOT turned on. The screen will not power up during this step.)
5. Continue to hold UP/VIDEO button for 20 seconds.
6. After 20 seconds release button and leave camera in SETUP mode for 2 minutes (updating)
7. After 2 minutes, switch camera to OFF.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Bushnell Drivers