Tenvis ROBOT2 Network Camera Firmware 3.1.1.1.4 Download

Posted at November 5, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Tenvis ROBOT2 Network Camera Firmware 3.1.1.1.4
Category	Network Ip Surveillance Baby Camera
Manufacturer	TENVIS
File Size	3.7 MB
Supported OS	OS Independent

Tenvis ROBOT2 Network Camera Firmware 3.1.1.1.4 Description

This package provides the necessary installation files of Tenvis ROBOT2 Network Camera Firmware version 3.1.1.1.4.

Important notice:

- Any upgrading has some potential risk, we don't suggest you upgrade if there has no big problem on your camera.We may not have the original firmware to provide you to downgrade firmware if you regret upgrading. Hope you understand.
1. Some models have multiple hardware versions and firmware version. Please verify the firmware version of your device. It can only upgrade firmware for the same hardware version. Wrong firmware upgrading may damage your device and avoid the warranty.
2. For some camera models, upgrade firmware may has the risk of losing camera UID and DDNS, please think twice
3. Do NOT upgrade the firmware via wireless connection
4. Do NOT turn off the power or cut down the Ethernet cable during upgrade process
5. Internet Explorer(IE) is recommended to upgrade the firmware
6. Please unzip the firmware if it is a zip file

Installation steps:

1. Save the downloadable package.
2. Log into the network camera's web user interface.
3. Navigate to the "System config" section.
4. In "System Update" section, click "Browse" and choose the firmware suitable for your camera.
5. Click "Upgrade" and wait as the device carries out the upgrade process.
6. Reboot the unit if required.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TENVIS Drivers